Greater London · England
Bath chip & crack repair in Falconwood, Greater London
Bath repair in Falconwood without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Repairs from £95
- Snagging damage from a refit
- A chip where the taps sit
Landlords, agents and businesses in Falconwood
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
We are used to working with agents and managing companies. Send the address, photos and access details.
About our bath repair in Falconwood
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. Typical jobs include chips caused by builders and damage beneath the taps, across roll-top & freestanding, acrylic and whirlpool & spa baths.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Area
- Falconwood (DA16, DA15, SE9)
- County
- Greater London
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
How the visit works
Visits start with a quick look at the job together, so you know exactly what we’re doing. Then the area is sheeted and masked and we start. You can expect it to take a morning or an afternoon, and we will keep you posted as we go.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Open a window if you can
- Mention any earlier repairs or resurfacing
- Clear toiletries, mats and anything else from around the area
How to get a price
Most customers in Falconwood get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Nearby places to Falconwood
Other services in Falconwood
Repair or replace in Falconwood?
Many people think a damaged bath means a new one. In most cases it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why us?
- A fixed quote before booking
- Everything repaired in place
- Rooms protected and left tidy
- Accredited with CHAS, Constructionline and SafeContractor
See our pricing and resurfacing vs replacement cost guide.
How to look after the repair
How the surface is treated afterwards matters:
- Protect the bath with a towel when doing jobs nearby
- Stick to mild cleaners and a soft cloth
- Keep metal cans and razors off the surface
- A dripping tap stains enamel, so fix it early
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
About Falconwood
Falconwood is about 2 miles north-east of Eltham, in Greater London. Across the DA16 area, we come to you. We cover 764 places in Greater London, from the larger towns to small villages. Our nearest city page is London, about 9 miles away.
Our technicians cover all of DA16, DA15 and SE9 and the streets around it. Whether you live on Hook Lane, Gordon Road and Kent Avenue or a nearby road, a technician can come to you. We also travel to Blackfen (1 mile south), East Wickham (1 mile north), Avery Hill (1 mile south-west), Shooter's Hill (1 mile north-west) and New Eltham (2 miles south-west). Further out, we also cover London (9 miles west), City of Westminster (11 miles west), Marylebone (11 miles west), Kensington (13 miles west), St Pancras (10 miles north-west) and Shoreditch (9 miles north-west).
Near you in Falconwood
In Falconwood, that means homes near Harris Academy Falconwood, The Plough and Harrow pub and Bishop Ridley Church, among other places. Also close by are Bishop Ridley Church of England VA Primary School (less than half a mile west) and Shoulder of Mutton Green (under half a mile north). The nearest railway station is Welling station, roughly 0.5 miles north-east. Further afield, we also cover the area around Broadway Shopping Centre (2.2 miles east) and Memorial Hospital (1.4 miles north-west). For a walk, there is The Tarn and Summer Hill.
How we price bath repair
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- Doing more than one item at once
- How many areas need work
- What the surface is made of
- How easy the damage is to reach
We charge the same wherever you are, so there is no premium for Falconwood. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed price
Before you send photos, these tips help us give you a firm price:
- The material, if you know it
- A wider photo showing the entire bath
- Details of any past repairs
- A coin or ruler next to the damage for scale
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
What we can’t put right
We will not take on work that will not last, so these are the limits:
- A steel bath rusted through
- Wear across the entire surface, which needs re-enamelling
- Water coming from the waste or taps rather than the bath
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
Your questions about bath repair in Falconwood
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Is a cracked acrylic bath repairable?
Typically, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
Will there be a smell?
Expect a mild smell while we are working.
How invisible is a bath repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Falconwood.
When can I have a bath again?
Generally the day after. We confirm the time before we leave.
What do you need from me?
Photos of the damage, a picture of the whole bath and your postcode. Then we’ll agree a date.
About our accreditations · Every repair comes with a one-year guarantee.
