Essex · England
Bath Repair for Feering homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Feering, with a one-year guarantee on every repair.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Rust spots around the plughole
Feering and the surrounding area
Feering is about 5 miles north-east of Witham, in Essex. Across the CO5 area, we come to you. Our repair technicians cover all 644 towns and villages in Essex. You can also see our page for London, about 42 miles away.
Our technicians cover all of the CO5 postcode area and the streets around it. We regularly work on streets such as The Street, Hall Farm Close and Kings Gardens and the roads around them. Other places close to Feering include Kelvedon (1 mile south-west), Stocks Green (1 mile north), Skye Green (2 miles north), Messing (2 miles east) and Windmill Hill (2 miles south). Larger places within reach include Colchester (8 miles east), Chelmsford (12 miles south-west), Braintree (7 miles west), Maldon (8 miles south), Witham (5 miles south-west) and Camulodunum (7 miles east).
Near you in Feering
Around Feering, we work in homes near Parish Church of St Mary, Parish Church of All Saints and Brockwell Meadows and the streets around them. You’ll also find The Old Anchor Public House (less than half a mile south-east), Thurstable School Sports College and Sixth Form Centre (2.2 miles south-east) and Feering Church of England Primary School (within half a mile north). Feering’s nearest station is Kelvedon station, about 0.6 miles west of the centre. Nearby you’ll also find Birch Castle (4.5 miles east) and Laundry & Mangle Museum (2.6 miles north-west). Not far away are Tiptree Heath Nature Reserve.
About our bath repair in Feering
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. Typical jobs include damage beneath the taps and a hole punched through by something heavy, across acrylic, whirlpool & spa baths and pressed steel enamel.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- Feering (CO5)
- Region
- Essex
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Feering: your questions answered
Can you redo an old repair?
Regularly. We strip it out, deal with any rust and repair it again.
Can you repair a hole in a bath?
In most cases. Send us a photo of the hole and one from under the bath if you can.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Will the repair show?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
Also near Feering
More services for Feering
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Common problems we fix in Feering
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal lets water in, and rust follows.
You may need us if you’ve spotted any of these:
- An old repair that has yellowed or come loose
- Cracks in an acrylic bath
- Holes from dropped items
- Snagging damage from a refit
Before you book anyone
- Whether the colour is mixed to match
- Who will actually do the work
- Is the price fixed, and does it include VAT?
- How long it needs to cure
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Keep abrasive pads and gritty cleaners away from the bath
- Have new chips seen to early
- Keep metal cans and razors off the surface
- Rinse it down after each bath
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
When a repair isn’t the answer
To be straight with you, there are a few things a repair will not fix:
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath that moves underfoot, until its support is fixed
- Wear across the whole surface, which needs re-enamelling
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Acrylic
What happens on the day
Visits start with a quick look at the job together, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. You can expect it to take a few hours, depending on the damage, and we will tell you if anything changes.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can typically use the bath the following day.
Preparing for the visit
- Point us to the nearest place to park
- Let us know about parking or access
- Mention if the room is upstairs or in a flat
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
What bath repair costs
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- How many areas need work
- What kind of damage it is
- What the surface is made of
- Previous DIY repairs that have to come out
We charge the same wherever you are, with no extra for Feering. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from photos
Most quotes are done from pictures alone. To make it quick:
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- Any details about the material
- Where you are, by postcode
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will say right away whether it can be repaired.
Repair or replace: which is better?
Many people think a damaged bath means a new one. In most cases it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Prices start from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why book with us
- Colour-matched on site
- We’ll tell you if it’s not worth repairing
- Rooms protected and left tidy
- Every repair guaranteed for a year
Read our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
