Suffolk · England

Bath Repair in Felixstowe

Bath repair in Felixstowe without the cost of replacing. Send us photos for a fixed price, then we come to you.

  • Repairs from £95
  • Scuffs and scratches in the surface
  • Rust by the waste and overflow
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Felixstowe?

Bath repair in Felixstowe without replacing anything

We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. You can usually use the bath the next day. We regularly repair acrylic, roll-top & freestanding and whirlpool & spa baths, and common reasons people get in touch are a failed DIY repair that’s discoloured or lifting and rust spots around the plughole.

Every repair is covered by a one-year guarantee, wherever you are in Suffolk.

Rusty chip next to a bath plughole, before and after repair
Area
Felixstowe (IP11)
Area hub
Suffolk
Cover
12 months on all our work
Quotes
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026

What happens on the day

Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for a few hours, depending on the damage from start to finish. Before leaving, we tell you when it can be used and how to look after it.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. The colour is mixed on the spot to match your bath.
  4. Finish coats go on, then the repair is polished to blend in.
  5. Once it has cured, normally by the next day, the bath is ready to use.

Before we arrive

  • Let us know about parking or access
  • Let us know if it has been repaired before
  • Avoid using the area for a few hours before we arrive

How to get a price

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Send photos for a quote

Related advice

Do you need bath repair in Felixstowe?

A cracked acrylic bath typically wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex until it cracks.

You may need us if you’ve spotted:

  • A chipped rim or side
  • Scratches you can feel with a fingernail
  • Chips under the taps
  • Snagging damage from a refit

Before booking anyone

  • Whether cleaning and preparation are in the price
  • How the room is protected while they work
  • Is the price fixed, and does it include VAT?
  • What the guarantee covers, and for how long

Our hiring checklist

Keeping it looking good

After the repair has cured, a few habits help it last:

  • Rinse it down after each bath
  • Avoid scourers, wire wool and gritty cream cleaners
  • Get a dripping tap fixed promptly
  • Make sure an acrylic bath is firm underfoot

Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.

A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.

Common questions in Felixstowe

Is repairing better than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.

What happens next?

You get a fixed quote and available dates. If we need another angle, we’ll ask.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Do I have to be there?

Someone needs to let us in and show us the job. You don’t need to watch us work.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

Do you work in Felixstowe?

Yes, we do. Technicians travel to Felixstowe from across the region, and the price is the same as everywhere else.

Do you repair coloured baths?

Yes, we match coloured baths too. We tint the finish to your bath on site.

Repair or replace in Felixstowe?

Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Prices start from £95. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why Felixstowe customers choose us

  • A year’s guarantee on all work
  • Nothing taken out or refitted
  • Usually one visit, start to finish
  • CHAS, Constructionline and SafeContractor accredited

See our full price list or bath cost comparison.

Prices and what affects them

Repairs from £95. We don’t charge extra for travel to Felixstowe. The price comes down to:

  • Whether old repairs or coatings need taking off
  • How many areas need work
  • The type of damage
  • What the surface is made of

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.

Send photos for a quote

The better the pictures, the more accurate the price. Here’s what helps:

  • Where you are, by postcode
  • A clear, close picture of the problem area
  • Something in shot to show the size
  • Good light, ideally daylight, without flash glare

For a price in Felixstowe, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Honest limits

A repair isn’t right for every job, for example:

  • Water coming from the waste or taps rather than the bath
  • A bath that moves underfoot, until its support is fixed
  • Cracks in parts of an acrylic bath we can’t get to from below

Send us pictures and we’ll tell you honestly.

Surfaces we repair

  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel
  • Pressed steel enamel

Covering Felixstowe

Felixstowe is about 10 miles south-east of Ipswich, in Suffolk. From the centre of Felixstowe to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Felixstowe is one of 731 towns and villages in Suffolk we cover. You can also see our page for London, about 69 miles away.

Our visits in IP11 work the same way as everywhere else we cover. Whether you live on High Street, Beach Station Road and Sub-Station Road or a nearby road, a technician can come to you. Felixstowe is on the A14 and A154, which makes it straightforward to reach. Close by, we cover Walton (1 mile north), Gulpher (1 mile north-east), Trimley St Mary (1 mile north-west), Old Felixstowe (1 mile east) and Lower Falkenham (2 miles north). Within a short drive, we also cover Ipswich (10 miles north-west), Kesgrave (8 miles north-west), Woodbridge (9 miles north), Stoke (10 miles north-west), Maidenhall Estate (10 miles north-west) and Priory Heath (8 miles north-west). As one of the bigger places in Suffolk, Felixstowe sees plenty of our work.

What’s near Felixstowe

Our clients here include homes close to Felixstowe Academy, SET Maidstone and Felixstowe International College, among other places. Nearby too are Church of St Mary (less than half a mile north) and The Feathers Inn (less than half a mile north). There’s a railway station in Felixstowe itself: Felixstowe station. Well-known places in the area include Felixstowe Community Hospital (0.7 miles east) and Felixstowe Museum (2.1 miles south-west). Open spaces near Felixstowe include Trimley Marshes.

Map of Felixstowe © OpenStreetMap contributors

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.

What your bath is made of matters

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Composite and resin

Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.