Suffolk · England

Bath Re-enamelling in Felixstowe

Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Felixstowe. Send pictures for a free, fixed quote.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • A bath that stays dull however much you clean it
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Felixstowe homes

The process

We turn up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes most of the day, and we leave the room as we found it.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Preparing for the visit

  • Keep a parking space free if you can
  • Open a window if you can
  • Make sure the area is dry

Ask for a price

You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a fixed price

Related advice

How we handle bath re-enamelling in Felixstowe

We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. Our repair technicians work on acrylic baths, basins & shower trays and cast iron baths, and common reasons people get in touch are a dull, rough surface that won’t come clean and chips and rust in more than one place.

Big or small, you get the same one-year guarantee.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Felixstowe (IP11)
County
Suffolk
Warranty
A year, on every repair
Price
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026

Honest limits

A repair isn’t always the answer, and we’d rather say so up front. We cannot fix:

  • Anything hidden under an old coating, until we remove it
  • A cast iron or steel bath that is cracked right through
  • A bath that is rusted through

If in doubt, send pictures and we will say what we think.

Materials we repair

  • Acrylic baths
  • Basins & shower trays
  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths

Landlord and trade work in Felixstowe

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.

For anyone letting property in or around Felixstowe, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.

Felixstowe questions

Can you price it without visiting?

Generally, yes. A close-up and a wider photo are enough to give a fixed price.

Someone resurfaced my bath and it’s peeling. Can you help?

Normally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.

Can tenants book a repair?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

How durable is a resurfaced bath?

It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.

What happens if you find more damage?

If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

Do I need to be at home?

Yes. We need access to the room while we work, at a time we agree with you.

How we price bath re-enamelling

Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:

  • How much damage there is
  • How hard the colour is to match
  • Doing more than one item at once
  • The material

A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Send pictures for a quote

We price nearly every job from photos. This is what to send:

  • Whether it’s been repaired or coated before
  • A close-up of the damage, in focus
  • What it’s made of, if you know
  • A coin or ruler next to the damage for scale

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

When to call us in Felixstowe

Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.

Contact us if you’ve noticed any of these:

  • A roll-top that is seen better days
  • Staining under the taps and around the waste
  • Worn patches where water runs and sits
  • A coloured bath you want in white

Before booking anyone

  • How the colour is matched
  • What protection goes down before work starts
  • Whether there are any call-out or travel charges
  • Aftercare advice

Choosing a repair company

Felixstowe and the surrounding area

Felixstowe is about 10 miles south-east of Ipswich, in Suffolk. Customers in Felixstowe get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Felixstowe is one of 731 places in Suffolk we cover. Our nearest city page is London, about 69 miles away.

Jobs in IP11 work the same way as everywhere else we cover. We regularly work on streets such as High Street, Beach Station Road and Sub-Station Road and the roads around them. With the A14 and A154 close by, Felixstowe is simple for us to get to. We also cover the places around Felixstowe: Walton (1 mile north), Gulpher (1 mile north-east), Trimley St Mary (1 mile north-west), Old Felixstowe (1 mile east) and Lower Falkenham (2 miles north). We also work in nearby towns such as Ipswich (10 miles north-west), Kesgrave (8 miles north-west), Woodbridge (9 miles north), Stoke (10 miles north-west), Maidenhall Estate (10 miles north-west) and Priory Heath (8 miles north-west). As one of the bigger places in Suffolk, Felixstowe sees plenty of our work.

Around Felixstowe

Typical jobs here are in homes near Felixstowe Academy, SET Maidstone and Felixstowe International College and the streets around them. Also close by are Church of St Mary (within half a mile north) and The Feathers Inn (within half a mile north). Felixstowe has its own railway station: Felixstowe station. Further afield, we also cover the area around Felixstowe Community Hospital (0.7 miles east) and Felixstowe Museum (2.1 miles south-west). Not far away are Trimley Marshes.

Map of Felixstowe © OpenStreetMap contributors

Repairing versus replacing in Felixstowe

If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

What you get with us

  • Every repair guaranteed for a year
  • CHAS and Constructionline accredited
  • Honest advice, even when it means no job
  • Typically one visit, start to finish

See our pricing or bath cost comparison.

Aftercare tips

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Clean with a soft cloth and mild detergent
  • Have chips seen to early
  • Rinse off hair dye, oils and bath bombs immediately
  • Repair dripping taps early

Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.

The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.

Materials and what they mean for the repair

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.