Norfolk · England
Bath chip & crack repair in Felmingham, Norfolk
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Felmingham. Free, fixed quotes from your photos.
- Repairs from £95
- Rusty patches near the plughole
- Chips along the edge of the bath
Bath repair in Felmingham, done in place
We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place. We work on acrylic, roll-top & freestanding and whirlpool & spa baths, and people most often call us about chips caused by builders and rusty patches near the plughole.
A one-year guarantee comes as standard, so you are covered after the visit.
- Area
- Felmingham (NR28)
- Region
- Norfolk
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair cannot fix
Some jobs are not right for a repair, for example:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in acrylic we cannot reach from underneath
- Metal that has corroded all the way through
If in doubt, send pictures and we will say what we think before you book.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Towns and villages near Felmingham
What else we do in Felmingham
What bath repair costs
Prices start from £95. We give every job a fixed price from pictures. This is what makes a difference:
- Whether old repairs or coatings need taking off
- The colour and finish to match
- How easy the damage is to reach
- The material
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
Most quotes are done from photos alone. To help us price it:
- One picture of the entire bath
- Where you are, by postcode
- One sharp close-up of the damage
- The material, if you know it
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Why repair rather than replace?
Replacing a fitted bath normally means a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. Repairing it deals only with the damage in a single visit. Prices start from £95. We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Most jobs done in one visit
- We will tell you if it’s not worth repairing
- Colours mixed by hand to suit your surface
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list or resurfacing vs replacement cost guide.
About Felmingham
Felmingham is about 2 miles west of North Walsham, in Norfolk. From the centre of Felmingham to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover 797 places in Norfolk, from the larger towns to small villages.
Every address in NR28 is within our area. From Church Road, Charles Rash Close and Sharon Close or a nearby road, a technician can come to you. Close by, we cover Banningham (2 miles west), North Walsham (2 miles east), Suffield (2 miles north-west), Antingham (3 miles north) and Bradfield (3 miles north-east). Larger places within reach include Norwich (12 miles south), Sprowston (11 miles south), Thorpe St Andrew (12 miles south), Sheringham (10 miles north-west), Norwich Lanes (13 miles south) and Heigham (13 miles south).
What’s near Felmingham
Typical jobs here are in homes near Paston College, Church of St Andrew and Felmingham Cutting. For rail, the closest station is North Walsham station, roughly 1.9 miles east. Other landmarks nearby include British Magic Museum (1.5 miles north-east) and Burgh next Aylsham (3 miles south-west).
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
The process
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we are doing. It generally takes a morning or an afternoon, and you’re welcome to carry on with your day while we work.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can generally use the bath the following day.
Before we arrive
- Let us know if it has been repaired before
- Have somewhere for us to park nearby if possible
- Ensure the area is dry
Getting a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
Aftercare tips
Once the work has cured, treat it gently:
- Keep abrasive pads and gritty cleaners away from the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- Rinse the bath after use, especially in hard water areas
- Keep metal cans and razors off the surface
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Take it off before we arrive.
Do you need bath repair in Felmingham?
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
Look out for these signs:
- An old repair that has yellowed or come loose
- Deep scratches in acrylic
- A chip where the taps sit
- Chips caused by builders
Before you book anyone
- How your room will be protected
- What happens if they find more damage
- How soon you can use it again
- The length of the guarantee and what it covers
Repairs by material
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Questions from Felmingham
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Can you quote from photos?
Typically, yes. Clear pictures let us give you a fixed quote without visiting.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders across Norfolk.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we’ll plan for it.
How do I get a price for bath repair in Felmingham?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
About our accreditations · Every repair comes with a one-year guarantee.
