West Sussex · England
Bath chip & crack repair in Felpham, West Sussex
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Felpham, with a one-year guarantee on every repair.
- Repairs from £95
- Deep scratches in acrylic
- An old repair that has yellowed or come loose
How we handle bath repair in Felpham
Most of our bath repairs take a few hours, and you can typically bathe again the next day. You will not need a plumber or tiler, because nothing is disconnected. Common call-outs are for a failed DIY repair that’s discoloured or lifting and a cracked acrylic bath, across pressed steel enamel, roll-top & freestanding and cast iron enamel.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Felpham (PO22, PO21)
- Area hub
- West Sussex
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Places near Felpham
Also in Felpham
Felpham and the surrounding area
Felpham is about 1 mile east of Bognor Regis, in West Sussex. Clients in Felpham get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Felpham is one of 371 towns and villages in West Sussex we cover. We work right across the region, from Felpham to London (55 miles away).
All of PO22 and PO21 is covered, from the main roads to the quietest streets. Streets in the area include Sea Road, Ley Road and Limmer Lane, all of which we cover. We also travel to South Bersted (1 mile west), Flansham (1 mile north-east), Bognor Regis (1 mile west), Middleton-on-Sea (2 miles east) and Shripney (2 miles north-west). Within a short drive, we also cover Worthing (11 miles east), Chichester (6 miles north-west), Selsey (7 miles south-west), Littlehampton (6 miles east), Lancing (15 miles east) and Emsworth (13 miles west).
Near you in Felpham
We visit homes around The Thatched House, The Brooks Local Nature Reserve and Church of St Mary. Other local landmarks include Felpham Community College (less than half a mile north-west) and Downview Primary School (0.5 miles north). The closest station to Felpham is Bognor Regis station, roughly 1 mile west of the centre. Nearby you’ll also find Bognor Regis Museum (1.2 miles south-west) and Bognor Regis War Memorial Hospital (1 mile west).
What bath repair costs
Repairs from £95. A fixed quote means you know the cost before you book. We look at:
- Doing more than one item at once
- The size and number of damaged areas
- The colour and finish to match
- The type of damage
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed quote
It only takes a minute to photograph the damage. Please include:
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
How it works
We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the job itself takes a morning or an afternoon. Before we leave, we explain the curing time and the aftercare.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, typically by the day after, the bath is ready to use.
How to prepare
- Tell us about any previous repairs or coatings
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
Get a quote
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Read more
For landlords and businesses
We work for landlords, letting agents and housing providers in Felpham as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Wear across the whole surface, which needs re-enamelling
- Cracks in acrylic we can’t reach from underneath
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Felpham
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
Common problems we fix in Felpham
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal will start to rust.
It’s worth getting a quote if you see:
- Chips on the rim or sides
- Rust by the waste and overflow
- Damage beneath the taps
- An old repair that has yellowed or come loose
Before booking anyone
- What prep work is covered
- Whether the price is fixed and includes VAT
- How soon you can use it again
- How the room is protected while they work
Should you replace it?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
Why book with us
- Straight answers about what a repair can do
- One price list for the entire UK
- Nothing taken out or refitted
- A year’s guarantee on all work
See our full price list and resurfacing vs replacement cost guide.
Common questions in Felpham
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we’ll plan for it.
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Is a holed acrylic bath repairable?
Frequently, if there is access underneath. We back the hole, fill it and refinish the surface.
Can you redo an old repair?
Yes. We remove the old filler and start again. Mention it when you send pictures.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
How long before I can use the bath?
Usually within a day, depending on the repair.
Can I add another job to the visit?
Of course, and it generally saves money. Just add the extra items to your pictures and you’ll get one combined price.
About our accreditations · Every repair comes with a one-year guarantee.
