North Ayrshire · Scotland
Bath Repair in Fergushill
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Fergushill. Free, fixed quotes from your pictures.
- Repairs from £95
- Chips on the rim or sides
- Cracks in an acrylic bath
Bath repair at your home in Fergushill
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands. We work on pressed steel enamel, roll-top & freestanding and whirlpool & spa baths, and the jobs we see most are holes from dropped items and a chip where the taps sit.
Whatever the size of the job, it’s backed by a one-year guarantee in Fergushill and across North Ayrshire.
- Area
- Fergushill (KA13)
- County
- North Ayrshire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
Landlords, letting agents and housing providers in Fergushill use us as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Fergushill: your questions answered
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Can I get a quote without a visit?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
How much does bath repair cost in Fergushill?
Prices start from £95. We give a fixed price from your photos. Send a close-up of the damage and a wider photo with your KA13 postcode.
Can you repair a crack in an acrylic bath?
Normally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
How long does the repair take to cure?
Most baths can be used the following day. We’ll tell you the exact curing time when we finish.
Towns and villages near Fergushill
More services for Fergushill
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
How we price bath repair
Repairs from £95. Quotes are free and the price is fixed. What we look at:
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- How much damage there is
The price reflects the work involved, not where you live. You will see the full price before you book, with no extras added later.
How to get a fixed quote
Phone photos are fine, there’s no need for anything special. Just ensure we can see:
- One picture of the whole bath
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
How the visit works
There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. Most visits take a few hours, depending on the damage.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can generally use the bath the next day.
Preparing for the visit
- Let us know if it has been repaired before
- Mention if the room is upstairs or in a flat
- Clear toiletries, mats and anything else from around the area
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and you’re under no obligation.
Related advice
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Leaking fittings, which need a plumber
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Rust that has eaten right through a steel bath
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
What we are called out for in Fergushill
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
It’s worth getting a quote if you see:
- A failed DIY repair that is discoloured or lifting
- Chips along the edge of the bath
- Scratches you can feel with a fingernail
- Chips under the taps
What your quote should include
- How the colour is matched
- What protection goes down before work starts
- Whether the price covers travel
- What the guarantee covers, and for how long
Where we work around Fergushill
Fergushill is about 2 miles east of Kilwinning, in North Ayrshire. We visit homes and businesses in Fergushill and nearby villages, so there is no workshop to go to. Fergushill is one of 53 places in North Ayrshire where we work. Our nearest city page is Glasgow, about 20 miles away.
Our technicians cover all of the KA13 postcode area and the streets around it. Other places close to Fergushill include Benslie (1 mile south-east), Lawthorn (2 miles south-east), Perceton (2 miles south-east), Irvine (2 miles south) and Girdle Toll (3 miles south). Larger places within reach include Saltcoats (5 miles west), Largs (13 miles north-west), Ardrossan (6 miles west), Stevenston (4 miles west), Kilbirnie (7 miles north) and West Kilbride (8 miles west).
Landmarks near Fergushill
We visit homes around Irvine Royal Academy, among other places. For rail, the closest station is Kilwinning station, roughly 2.2 miles west. Well-known places in the area include Kilwinning Heritage Centre (1.7 miles west) and Eglinton Castle (1 mile south-west). For a walk, there is Stevenston Loch.
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Do not scrub with anything abrasive
- A dripping tap stains enamel, so fix it early
- Do not leave razors or cans standing in the bath
- Rinse the bath after use, especially in hard water areas
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
About our accreditations · Every repair comes with a one-year guarantee.
