West Sussex · England
Bath chip & crack repair in Findon Valley, West Sussex
Local bath repair for Findon Valley: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Deep scratches in acrylic
How we handle bath repair in Findon Valley
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands with a one-year guarantee. Typical jobs include a failed DIY repair that’s discoloured or lifting and impact holes in acrylic, on acrylic, pressed steel enamel and cast iron enamel.
You get a one-year guarantee, the same in Findon Valley as everywhere else we work.
- Where
- Findon Valley (BN14, BN13)
- County
- West Sussex
- Cover
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How to care for the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Don’t leave razors or cans standing in the bath
- Keep abrasive pads and gritty cleaners away from the bath
- Do not leave a fresh chip for long
- Put a towel in the bath if you’re working above it
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Prices start from £95. The price reflects the work involved, not your postcode. You will see the full price before booking, with no extras added later.
Why choose Surface Doctor in Findon Valley
- We will tell you if it’s not worth repairing
- We leave the room as we found it
- CHAS and Constructionline accredited
- Fixed prices from your photos
Read our full price list or guide to resurfacing and replacement costs.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Where we work around Findon Valley
Findon Valley is about 2 miles north of Worthing, in West Sussex. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover 371 places in West Sussex, from the larger towns to small villages. You can also see our page for London, about 47 miles away.
Every address in BN14 and BN13 is within our area. That includes homes on Mill Lane, Furze Road and Gorse Lane. If you’re just outside Findon Valley, we cover Salvington (1 mile south), Offington (1 mile south), Worthing (2 miles south), Broadwater (2 miles south-east) and Sompting (3 miles south-east). We also work in nearby towns such as Horsham (15 miles north), Bognor Regis (13 miles west), Burgess Hill (14 miles north-east), Littlehampton (6 miles south-west), Shoreham-by-Sea (6 miles east) and Lancing (4 miles south-east).
Local landmarks in Findon Valley
Typical jobs here are in homes near Vale School, Durrington High School and All Saints. The closest station to Findon Valley is West Worthing station, about 2.4 miles south. Nearby you will also find Worthing Hospital (2.9 miles south-east) and Old Castle (1.9 miles south). For a walk, there is Widewater Lagoon and Steep Down.
Signs you need bath repair in Findon Valley
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Look out for any of the following:
- A kit repair that didn’t last
- Damage done while the bathroom was being fitted
- Holes from dropped items
- Chips along the edge of the bath
What your quote should include
- The length of the guarantee and what it covers
- What aftercare is recommended
- How long it needs to cure
- What preparation is included
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
The process
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Plan for two to three hours for most chips from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
How to get a price
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will say straight away whether it can be repaired.
Read more
What we can’t put right
Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:
- Acrylic cracks with no access behind them
- Leaks from the waste or overflow fittings (a plumber’s job)
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Findon Valley
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
Findon Valley: your questions answered
Is a holed acrylic bath repairable?
In most cases. Send us a picture of the hole and one from under the bath if you can.
How long before I can use the bath?
Typically the day after. We confirm the time before we leave.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
What happens after I send photos?
You’ll get a fixed quote back. There’s no obligation to book.
How much does bath repair cost in Findon Valley?
Prices start from £95. We give a fixed quote based on pictures of the damage. Send a close-up and a photo of the entire item and your postcode.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Towns and villages near Findon Valley
Also in Findon Valley
About our accreditations · Every repair comes with a one-year guarantee.
