Coventry · England
Bath chip & crack repair in Finham, Coventry
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Finham, with a one-year guarantee on every repair.
- Repairs from £95
- Chips under the taps
- Chips caused by builders
Bath repair at your home in Finham
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath. You can normally use the bath the following day. Typical jobs include cracks in an acrylic bath and deep scratches in acrylic, across cast iron enamel, whirlpool & spa baths and pressed steel enamel.
All our work is covered by our one-year guarantee.
- Area
- Finham (CV3, CV8)
- Area hub
- Coventry
- Warranty
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Finham
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. We repair snagging damage like this regularly.
Common reasons people in Finham contact us are:
- A chipped rim or side
- Damage beneath the taps
- Scuffs and scratches in the surface
- Rust spots around the plughole
What your quote should include
- Who turns up on the day
- Whether the price is fixed and includes VAT
- How to look after the finish
- How changes to the job are handled
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Get any new chip repaired before it rusts
- Clean with warm water and a mild detergent
- Get a dripping tap fixed promptly
- Cover the bath during DIY or decorating
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
The process
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes two to three hours for most chips. If anything looks different from your pictures, we’ll talk to you before going ahead.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Tell us about parking, stairs or access
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Related advice
How we price bath repair
Repairs from £95. We do not charge extra for travel to Finham. The price depends on:
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- How hard the colour is to match
- What the surface is made of
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Quotes from your photos
Phone photos are fine, there is no need for anything special. Make sure they show:
- What it’s made of, if you know
- Details of any past repairs
- Something in shot to show the size
- The postcode, so we can plan the visit
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and you are under no obligation.
What we can’t put right
A few problems are outside what a surface repair can do:
- Flexing caused by a failed cradle or loose feet
- Cracks in acrylic we can’t reach from underneath
- Leaking fittings, which need a plumber
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
Where we work around Finham
Finham is about 3 miles south of Coventry, in Coventry. Jobs in Finham are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Our repair technicians cover all 88 towns and villages across Coventry. You can also see our page for Birmingham, about 17 miles away.
We cover every part of the CV3 and CV8 postcode area and the streets around it. You will find streets such as Green Lane, Howes Lane and Daleway Road. We also cover the places around Finham: Green Lane (1 mile north-west), Stivichall (1 mile north-east), Cheylesmore (1 mile north), Stoneleigh (1 mile south) and Canley (2 miles north-west). Further out, we also cover Coventry (3 miles north), Hillfields (3 miles north), Bishopsgate Green (3 miles north), Radford (3 miles north), Ernesford Grange (3 miles north-east) and Foleshill (5 miles north-east).
What’s near Finham
We visit homes around Finham Park School, War Memorial Park and Church of Saint John the Baptist and the streets around them. For rail, the closest station is Coventry station, about 1.9 miles north. Further afield, we also cover the area around Aircraft Radio Museum (1.7 miles east) and Ford's Hospital (2.3 miles north). For a walk, there is Ryton Wood Meadows and Oxpen Meadow Lake.
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Nearby places to Finham
More services for Finham
Why repair rather than replace?
Replacing a bath rarely stops at the bath: tiles along the rim generally crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Prices start from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Rooms protected and left tidy
- No need to remove anything
- Colour-matched on site
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list or resurfacing vs replacement cost guide.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Finham: your questions answered
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Can rust on a bath be repaired?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Is repairing better than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
When can I have a bath again?
Normally within a day, though it depends on what we’ve done.
What areas do you cover?
We work UK-wide, and that includes Finham. Our prices are the same everywhere.
About our accreditations · Every repair comes with a one-year guarantee.
