Greater London · England
Bath Repair for Finsbury homes
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Finsbury. Send photos for a free, fixed quote.
- Repairs from £95
- Deep scratches in acrylic
- Damage beneath the taps
Signs you need bath repair in Finsbury
Rust typically starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
You may need us if you’ve spotted:
- Chips on the rim or sides
- Hairline or through cracks in acrylic
- Damage beneath the taps
- Damage done while the bathroom was being fitted
Comparing quotes
- How soon you can use it again
- Whether a trained technician does the job
- How the colour is matched
- Aftercare advice
How we handle bath repair in Finsbury
Most of our bath repairs take a few hours, and the bath is back in use the day after. You will not need a plumber or tiler, because nothing is disconnected. We regularly repair pressed steel enamel, whirlpool & spa baths and acrylic, and common reasons people get in touch are chips caused by builders and a chipped rim or side.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Finsbury (EC1V, N1, EC2A)
- Region
- Greater London
- Guarantee
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Finsbury: your questions answered
Will there be a smell?
There can be some smell while we work. It fades as everything cures.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
How long before I can use the bath?
Most baths can be used the following day. We confirm the time before we leave.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
About Finsbury
Finsbury is about 2 miles north of London, in Greater London. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Finsbury is one of 764 towns and villages in Greater London where we work.
All of EC1V, N1 and EC2A is within our area, from the main roads to the quietest streets. From Oat Lane, Long Lane and Love Lane or a nearby road, a technician can come to you. Finsbury is on the A1 and A501, so it’s easy for us to reach. We also travel to St Luke's (1 mile north), Barbican Estate (1 mile south), City of London (1 mile south), Bishopsgate (1 mile south-east) and Shoreditch (1 mile east). Within a short drive, we also cover City of Westminster (3 miles west), Kensington (5 miles west), Walthamstow (5 miles north-east), Hampstead (4 miles north-west), Ruislip (14 miles west) and Brompton (4 miles south-west).
Around Finsbury
Around Finsbury, we work in homes near St Mary-at-Hill, The Jugged Hare pub and Central Foundation Boys' School, among other places. Other local landmarks include Jewin Welsh Presbyterian Chapel (within half a mile south-west), Charterhouse Square School (less than half a mile south-west), Barts Health Archives (0.5 miles south-west) and Artillery Ground (within half a mile east). Finsbury has its own railway station: Old Street station. Nearby you’ll also find St Luke's Hospital for Lunatics (within half a mile north-east) and County of London (0.5 miles south). For a walk, there’s Barnsbury Wood and Ludgate Hill.
- Schools near Finsbury include Prior Weston Primary School and Children's Centre (less than half a mile south-west)
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Don’t scrub with anything abrasive
- Get any new chip repaired before it rusts
- Clean with warm water and a mild detergent
- Ensure an acrylic bath is firm underfoot
There is nothing special to do after a repair, beyond gentle cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
Landlords, agents and businesses in Finsbury
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
We regularly work with letting and managing agents. Send the address, photos and access details.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
Repairing versus replacing in Finsbury
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why choose Surface Doctor in Finsbury
- Colour-matched on site
- Nothing taken out or refitted
- Free fixed quotes from pictures
- Technicians who travel to you, UK-wide
Take a look at our full price list and bath cost comparison.
Places near Finsbury
Other services in Finsbury
What a repair cannot fix
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send photos and we will give you a straight answer.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
What happens on the day
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a morning or an afternoon, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can usually use the bath the day after.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Let us know if it has been repaired before
- Let us know about parking or access
Getting a price
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
