Nottinghamshire · England
Bath Repair for Firbeck homes
Bath repair in Firbeck without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Repairs from £95
- A hole punched through by something heavy
- Damage done while the bathroom was being fitted
FAQs for Firbeck
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Is a holed acrylic bath repairable?
In most cases. Send us a picture of the hole and one from under the bath if you can.
What areas do you cover?
Across the UK. Prices do not change with location.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Bath repair at your home in Firbeck
A typical bath repair is a few hours’ work, and you can typically bathe again the next day. You will not need a plumber or tiler, because nothing is disconnected. We work on cast iron enamel, roll-top & freestanding and pressed steel enamel, and common reasons people contact us are a chip where the taps sit and a chipped rim or side.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Firbeck (S81)
- Region
- Nottinghamshire
- Warranty
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Firbeck
What else we do in Firbeck
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What affects the price in Firbeck
Prices start from £95. There is no area surcharge for Firbeck. What changes the price is:
- Whether old repairs or coatings need taking off
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book, with no extras added later.
Send photos for a quote
Most quotes are done from pictures alone. To make it quick:
- What it’s made of, if you know
- A clear, close picture of the problem area
- Something in shot to show the size
- A picture taken from further back
If you’re in Firbeck and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Firbeck and the surrounding area
Firbeck is about 3 miles south-east of Maltby, in Nottinghamshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in all 329 towns and villages across Nottinghamshire, from the larger towns to small villages. We work right across the region, from Firbeck to Leeds (33 miles away).
Our visits in S81 are booked in the same way as anywhere else. From St Martin's Close, Flat Lane and Lime Avenue or a nearby road, a technician can come to you. Close by, we cover Letwell (1 mile south), Langold (2 miles south-east), Oldcotes (2 miles east), Gildingwells (2 miles south) and Costhorpe (2 miles south-east). We also work in nearby towns such as Worksop (5 miles south), Retford (10 miles south-east), Shirebrook (13 miles south), Market Warsop (13 miles south), New Ollerton (14 miles south-east) and Kilton (6 miles south).
Local landmarks in Firbeck
Locally, our jobs take us to homes close to Sandbeck Park and Roche Abbey, Dinnington Comprehensive School and Church of St Martin. The closest station to Firbeck is Shireoaks station, about 4.6 miles south of the centre. Well-known places in the area include Bassetlaw Hospital (5.4 miles south) and St Leger Farm Museum (2.8 miles west).
How it works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which usually takes a morning or an afternoon. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Preparing for the visit
- Open a window if you can
- Move bottles, mats and clutter away from the area
- Mention any parking restrictions or tricky access
How to get a price
Upload a picture of the damage and a wider shot of the entire item, and tell us you are in Firbeck, and we’ll come back with a fixed quote.
Read more
Landlords, agents and businesses in Firbeck
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
When a repair is not the answer
In fairness, some problems need a different fix:
- Cracks in parts of an acrylic bath we cannot get to from below
- Metal that has corroded all the way through
- Water coming from the waste or taps rather than the bath
Send us photos and we’ll tell you honestly.
Materials we work on in Firbeck
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
When to call us in Firbeck
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water collects there, so chips nearby rust quickly.
These are the problems we are asked about most:
- A hole punched through by something heavy
- A chip where the taps sit
- Damage done while the bathroom was being fitted
- Chips along the edge of the bath
Before booking anyone
- How long it needs to cure
- Who will actually do the work
- What the guarantee covers, and for how long
- Whether the price covers travel
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Firbeck
- Accredited with CHAS, Constructionline and SafeContractor
- Most jobs done in one visit
- Every repair guaranteed for a year
- Everything repaired in place
See our full price list or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
