Nottinghamshire · England

Bath Repair for Retford homes

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Retford and across Nottinghamshire. Free, fixed quotes from your photos.

  • Repairs from £95
  • A hole punched through by something heavy
  • Snagging damage from a refit
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Retford

Honest limits

A repair is not right for every job, for example:

  • A bath that moves underfoot, until its support is fixed
  • Rust that has eaten right through a steel bath
  • Wear across the entire surface, which needs re-enamelling

Not sure? Send photos and we will give you a straight answer before booking.

What we work on

  • Whirlpool & spa baths
  • Cast iron enamel
  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel

How we handle bath repair in Retford

Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. If you’re dealing with a cracked acrylic bath and scuffs and scratches in the surface, we can help.

You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.

Before and after: a chipped, rust-stained bath around the plughole
Area
Retford (DN22)
County
Nottinghamshire
Cover
12 months on all our work
Price
From £95. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026

Do you need bath repair in Retford?

Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.

The things clients generally mention when they call are:

  • Rusty patches near the plughole
  • Impact holes in acrylic
  • A failed DIY repair that’s discoloured or lifting
  • Snagging damage from a refit

Comparing quotes

  • A fixed quote, and whether VAT is included
  • How your room will be protected
  • How changes to the job are handled
  • If travel is included in the price

10 questions to ask before you book

Covering Retford

Retford is about 15 miles south-east of Doncaster, in Nottinghamshire. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Retford is one of 329 towns and villages in Nottinghamshire we cover. Our nearest city page is Leeds, about 42 miles away.

Jobs in DN22 are booked in the same way as anywhere else. Whether you live on The Square, Station Road and London Road or anywhere nearby, we can come to you. Being close to the A620 and A638, Retford is simple for us to get to. Other places close to Retford include Ordsall (1 mile south), Bolham (1 mile north), Welham (2 miles east), Little Gringley (2 miles east) and Babworth (2 miles south-west). We also work in nearby towns such as Worksop (7 miles west), Mansfield Woodhouse (15 miles south-west), Forest Town (15 miles south-west), Shirebrook (14 miles south-west), Market Warsop (12 miles south-west) and New Ollerton (8 miles south). Retford is one of the larger places we cover in Nottinghamshire.

Local landmarks in Retford

We visit homes around Ordsall Hall School, The Ship Inn and Retford Oaks Academy. You will also find St Michael the Archangel's Church (less than half a mile north-west) and St Swithun's Church of England Primary Academy (less than half a mile east). The closest station to Retford is Retford station, about 0.5 miles south of the centre. A little further out are Rampton Secure Hospital (5 miles south-east) and Grove Castle Hill (2.3 miles east). The countryside around Retford includes Idle Valley Nature Reserve and Bellmoor Lake.

Map of Retford © OpenStreetMap contributors

Common questions in Retford

Is a bath repair durable?

Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.

Do you cover Retford?

Yes, we do. Repair technicians travel to Retford from across the region, and the price is the same as everywhere else.

Can rust on a bath be repaired?

Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.

Is a holed acrylic bath repairable?

In most cases. Send us a photo of the hole and one from under the bath if you can.

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

How soon can you come?

It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the photos can’t show what we need.

DIY kit or professional repair?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

How the visit works

On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take two to three hours for most chips. We tidy up before we leave and tell you when it’s ready to use.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

Getting ready for the visit

  • Clear the area around the damage
  • Let the surface dry out before the visit
  • Open a window if you can

Getting a price

Email us a picture of the damage and one of the whole item, and tell us you’re in Retford, and we will come back with a fixed quote.

Get a fixed price

Read more

Why repair rather than replace?

For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

What you get with us

  • Honest advice, even when it means no job
  • Repair technicians who travel to you, UK-wide
  • CHAS, Constructionline and SafeContractor accredited
  • Dust sheets down, tidy finish

Read our prices page and resurfacing vs replacement cost guide.

Work for landlords and builders

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

How we price bath repair

Repairs from £95. Every quote is fixed and free. What we take into account:

  • How much damage there is
  • The material
  • Any earlier repairs that need removing first
  • The colour and finish to match

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Quotes from your photos

Phone pictures are fine, there is no need for anything special. Make sure they show:

  • Whether it’s been repaired or coated before
  • Any details about the material
  • A picture taken from further back
  • A close-up of the damage, in focus

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

How to care for the repair

Much of the damage we repair could have been avoided. A few tips:

  • Give the bath a quick rinse after use
  • Keep metal cans and razors off the surface
  • Do not scrub with anything abrasive
  • Use a soft cloth and washing-up liquid for everyday cleaning

Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.