Derbyshire · England
Bath Repair for Flagg homes
Problem with your bath in Flagg? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- A kit repair that didn’t last
- A chipped rim or side
Prices and what affects them
Prices start from £95. Each job gets its own fixed price. This is what makes a difference:
- Any earlier repairs that need removing first
- Doing more than one item at once
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before booking.
Quotes from your photos
When you take your photos, a few simple things make all the difference:
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
- A close-up of the damage, in focus
- Where you are, by postcode
For a price in Flagg, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
About our bath repair in Flagg
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in a single visit. Typical jobs include damage done while the bathroom was being fitted and cracks in an acrylic bath, in roll-top & freestanding, whirlpool & spa baths and pressed steel enamel.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Flagg (SK17)
- Region
- Derbyshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Flagg
What else we do in Flagg
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Questions from Flagg
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Can you repair a failed DIY repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
How invisible is a bath repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.
Do you need bath repair in Flagg?
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Signs it’s time to call us include:
- Cracks in an acrylic bath
- Holes from dropped items
- A chip where the taps sit
- A kit repair that didn’t last
What to look for in a quote
- How long it needs to cure
- Whether cleaning and preparation are in the price
- What happens if they find more damage
- Aftercare advice
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What we do, step by step
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Ensure the room can be ventilated
- Move bottles, mats and clutter away from the area
- Avoid using the area for a few hours before we arrive
Getting a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
Related advice
For landlords and businesses
We’re used to working with agents and managing companies. Send the address, photos and access details and we will handle the rest.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
What a repair cannot fix
A repair is not always the answer, and we will tell you before we start. Repairs won’t solve:
- A bath that moves underfoot, until its support is fixed
- Acrylic cracks with no access behind them
- Rust that has eaten right through a steel bath
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
Our work in Flagg
Flagg is about 5 miles south-east of Buxton, in Derbyshire. Whether you’re in the middle of Flagg or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover 532 places across Derbyshire, from the larger towns to small villages. We work right across the region, from Flagg to Manchester (about 25 miles away).
We work across SK17. Whether you live on Mycock Lane and Main Road or anywhere nearby, a technician can come to you. Other places close to Flagg include Taddington (2 miles north), Priestcliffe (2 miles north), Ashford in the Water (4 miles east), Little Longstone (4 miles north-east) and Great Longstone (5 miles north-east). We also work in nearby towns such as Chesterfield (15 miles east), Buxton (5 miles north-west), Dronfield (15 miles north-east), Matlock (11 miles south-east), Ashbourne (14 miles south) and New Mills (14 miles north-west).
Local landmarks in Flagg
Other landmarks nearby include Buxton Hospital (5.2 miles north-west). Open spaces near Flagg include Harpur Hill Quarry and Taddington Moor.
Should you replace it?
A new bath brings a chain of other jobs: tiles along the rim normally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Prices start from £95. The price reflects the work involved, not your postcode. You’ll see the full price before you book, with no extras added later.
Why book with us
- Colour mixed on the day to match
- One visit for most repairs
- Straight answers about what a repair can do
- Nothing taken out or refitted
Read our full price list or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
