Lincolnshire · England
Bath chip & crack repair in Fleet, Lincolnshire
Bath repair in and around Fleet: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Hairline or through cracks in acrylic
- Holes from dropped items
How we handle bath repair in Fleet
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. We work on whirlpool & spa baths, pressed steel enamel and acrylic, and people most often call us about chips caused by builders and damage beneath the taps.
Every repair comes with a one-year guarantee, wherever you are in Lincolnshire.
- Where
- Fleet (PE12)
- County
- Lincolnshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Fleet and nearby
Fleet is about 9 miles east of Spalding, in Lincolnshire. We visit clients in Fleet and nearby villages, so you do not need to take anything anywhere. Fleet is one of 732 places in Lincolnshire we cover.
Our visits in PE12 work the same way as everywhere else we cover. Local streets include Hazelwood Lane, Church Gate and Proudfoot Lane, all of which we cover. Nearby, we also work in Gedney (1 mile east), Gedney Broadgate (2 miles south-east), Chapelgate (2 miles east), Holbeach Fen (2 miles south-west) and Whaplode St Catherine (4 miles south-west). We also work in nearby towns such as Boston (13 miles north), Spalding (9 miles west), Pinchbeck (9 miles west), Witham (13 miles north), Long Sutton (3 miles east) and Crowland (13 miles south-west).
Around Fleet
Typical jobs here are in homes near University Academy Holbeach, Church of St Mary Magdalen and The Bull Public House. A little further out are Fleet Motte (0.5 miles south).
When to call us in Fleet
Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Common reasons people in Fleet contact us are:
- Holes from dropped items
- Snagging damage from a refit
- Rust by the waste and overflow
- A kit repair that didn’t last
Questions to ask before booking
- Whether the price is fixed and includes VAT
- What preparation is included
- How long the guarantee is and what it covers
- Whether the colour is mixed to match
Honest limits
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Cracks in acrylic we can’t reach from underneath
- Leaking fittings, which need a plumber
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Fleet
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
Landlord and trade work in Fleet
Landlords, letting agents and housing providers in Fleet use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
How it works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job typically takes two to three hours for most chips. We clean up when we’re done and let you know when you can use it again.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Keep a parking space free if you can
- Ensure the area is dry
- Tell us about parking, stairs or access
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Related advice
Fleet: your questions answered
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you repair something that is been repaired before?
Normally, yes. The old repair comes out first.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Do you work in Fleet?
Yes, we do. Repair technicians travel to Fleet from across the region, and the price is the same as everywhere else.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Do you repair coloured baths?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Can you quote from photos?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Repair or replace in Fleet?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.
What you get with us
- Honest advice, even when it means no job
- Generally one visit, start to finish
- Dust sheets down, tidy finish
- Fixed prices from your pictures
See our prices page and resurfacing vs replacement cost guide.
Nearby places to Fleet
More services for Fleet
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Clean with warm water and a mild detergent
- Keep metal cans and razors off the surface
- Give the bath a quick rinse after use
- Protect the bath with a towel when doing jobs nearby
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
What affects the price in Fleet
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- Any earlier repairs that need removing first
- Unusual colours or finishes
- Where the damage is and how we get to it
- How much damage there is
We charge the same wherever you are, with no extra for Fleet. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from pictures
Most quotes are done from pictures alone. To help us price it:
- Any details about the material
- Where you are, by postcode
- A coin beside the damage so we can judge size
- Natural light rather than flash
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
About our accreditations · Every repair comes with a one-year guarantee.
