North Lincolnshire · England

Bath chip & crack repair in Flixborough, North Lincolnshire

Fixed-price bath repair in Flixborough and the surrounding area, typically in one visit and guaranteed for a year.

  • Repairs from £95
  • A chipped rim or side
  • A cracked acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Flixborough homes

How we handle bath repair in Flixborough

You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. Common call-outs are for an old repair that has yellowed or come loose and a chip where the taps sit, on cast iron enamel, acrylic and roll-top & freestanding.

You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.

Bath enamel chip by the waste, filled and colour matched (before and after)
Location
Flixborough (DN15)
County
North Lincolnshire
Warranty
12 months on all our work
Quote
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026

Landlord and trade work in Flixborough

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.

What happens on the day

The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes a few hours. Before we leave, we explain how soon it can be used and how to care for it.

  1. First, we check the damage against your photos and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Before we arrive

  • Tell us about any previous repairs or coatings
  • Clear the area around the damage
  • Mention if the room is upstairs or in a flat

How to get a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.

Get a fixed price

Advice

Looking after it afterwards

A little care keeps the finish looking good. We recommend:

  • Stick to mild cleaners and a soft cloth
  • Protect the bath with a towel when doing jobs nearby
  • Keep abrasive pads and gritty cleaners away from the bath
  • Fix dripping taps early to stop staining and limescale

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.

Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.

When a repair isn’t the answer

Before booking, it’s worth knowing the limits:

  • Rust that has eaten right through a steel bath
  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

Not sure? Send pictures and we will give you a straight answer.

Materials we repair

  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel
  • Whirlpool & spa baths
  • Pressed steel enamel

DIY kit or professional repair?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Common problems we fix in Flixborough

Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.

The things customers generally mention when they call include:

  • Scuffs and scratches in the surface
  • Hairline or through cracks in acrylic
  • A chip where the taps sit
  • Rusty patches near the plughole

What to look for in a quote

  • The length of the guarantee and what it covers
  • Whether a trained technician does the job
  • What happens if the damage is worse than the photos show
  • A fixed price, and whether VAT is included

10 questions to ask before you book

Flixborough questions

Can a cracked acrylic bath be fixed?

In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.

What if the damage is worse than the photos show?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

How soon can you come?

We will give you dates with your quote. Tell us if you need it done quickly.

Is it worth repairing rather than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.

Is a bath repair durable?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

Do you hold any accreditations?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

How much does bath repair cost in Flixborough?

Repairs from £95. Every job gets a fixed quote from your photos. Send a close-up and a photo of the entire item with your DN15 postcode.

What areas do you cover?

Everywhere in the UK, Flixborough included. Travel is included in the price.

Different materials, different repairs

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Flixborough and the surrounding area

Flixborough is about 4 miles north of Scunthorpe, in North Lincolnshire. Whether you are in the middle of Flixborough or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 90 towns and villages across North Lincolnshire, from the larger towns to small villages. We work right across the region, from Flixborough to Leeds (38 miles away).

Here we cover the DN15 postcode area. That includes homes on High Street, The Steadings and Burton Road and the roads around them. Nearby, we also work in Flixborough Stather (1 mile west), Normanby (1 mile north-east), Burton upon Stather (2 miles north), Dragonby (2 miles east) and Thealby (2 miles north-east). Larger places within reach include Scunthorpe (4 miles south), Barton-upon-Humber (11 miles north-east), Bottesford (5 miles south), Brigg (9 miles south-east), Broughton (7 miles south-east) and Epworth (9 miles south-west).

Near you in Flixborough

Typical jobs here are in homes near Church of All Saints, Outwood Academy Foxhills and The Flixborough Inn and the streets around them. The nearest railway station is Scunthorpe station, roughly 2.9 miles south-east. Other landmarks nearby include Scunthorpe General Hospital (2.7 miles south).

Map of Flixborough © OpenStreetMap contributors

Should you replace it?

A new bath brings a chain of other jobs: tiles along the rim usually crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

What you get with us

  • No extra charge for your area
  • Rooms protected and left tidy
  • One-year guarantee on every repair
  • Normally one visit, start to finish

Read our prices page and bath cost comparison.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.