Kent · England
Bath Repair for Folly Town homes
Fixed-price bath repair in Folly Town and the surrounding area, usually in one visit and guaranteed for a year.
- Repairs from £95
- Cracks in an acrylic bath
- Chips on the rim or sides
Repair or replace: which is better?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Our bath repair starts from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- Most jobs done in one visit
- Every repair guaranteed for a year
- CHAS, Constructionline and SafeContractor accredited
- Colours mixed by hand to suit your surface
Read our prices page and bath cost comparison.
Bath repair in Folly Town without replacing anything
A typical bath repair is a few hours’ work, and the bath is back in use the next day. There is no need to book a plumber or tiler, because nothing is disconnected. Whether it’s a kit repair that didn’t last and holes from dropped items, we can help, on whirlpool & spa baths, acrylic and roll-top & freestanding alike.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Folly Town (TN25)
- County
- Kent
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When we would advise against a repair
It helps to know what we can’t do:
- A bath worn all over, where resurfacing makes more sense
- Metal that has corroded all the way through
- Acrylic cracks with no access behind them
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
What affects the price in Folly Town
Repairs from £95. You won’t pay by the hour. The price is based on:
- Previous DIY repairs that have to come out
- How many items we do on one visit
- The material
- How hard the colour is to match
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Please include:
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath
- Any details about the material
- A close-up of the damage, in focus
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
When to call us in Folly Town
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Keep an eye out for these signs:
- A hole punched through by something heavy
- Chips along the edge of the bath
- Scuffs and scratches in the surface
- Rust spots around the plughole
Comparing quotes
- What aftercare is recommended
- What preparation is included
- How changes to the job are handled
- Whether the colour is mixed to match
Places near Folly Town
What else we do in Folly Town
For landlords and businesses
For anyone letting property in or around Folly Town, we will quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
We work for landlords, letting agents and housing providers in Folly Town as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Folly Town: your questions answered
Can a cracked acrylic bath be fixed?
Usually, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
When can I have a bath again?
Normally within a day, though it depends on what we have done.
Is a bath repair durable?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Do you cover the whole of Kent?
Everywhere in the UK, Folly Town included. There is no extra charge for travel.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Will the repair show?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Folly Town and nearby
Folly Town is about 5 miles east of Ashford, in Kent. Wherever you are in the TN25 postcode area, we come to you. We work in all 922 towns and villages across Kent. We work right across the region, from Folly Town to London (about 52 miles away).
Here we cover the TN25 postcode area. We also travel to Hastingleigh (1 mile east), Hassell Street (1 mile north), Brook (1 mile west), Brabourne (2 miles south) and Wye (2 miles north-west). Further out, we also cover Ashford (5 miles west), Canterbury (9 miles north-east), Dover (14 miles east), Folkestone (10 miles south-east), Whitstable (13 miles north) and Faversham (11 miles north-west).
Local landmarks in Folly Town
Typical jobs here are in homes near Church of St Mary, The Bowl Inn and Wye School. The nearest railway station is Wye station, roughly 2.7 miles north-west. A little further out are William Harvey Hospital (3.6 miles south-west). Open spaces near Folly Town include Hatch Park.
The process
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll get on with it. Most visits take a few hours, depending on the damage, including clearing up.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the following day.
How to prepare
- Keep children and pets away from the room on the day
- Tell us if there are stairs or a lift
- Clear the area around the damage
Ask for a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Advice
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
