Bolton · England

Bath Repair in Four Gates

Bath repair for Four Gates, without a refit. Get a fixed price from your photos, then book a visit.

  • Repairs from £95
  • A cracked acrylic bath
  • Chips on the rim or sides
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Four Gates

What we are called out for in Four Gates

A cracked acrylic bath normally wasn’t supported properly. Legs that are not adjusted, a missing cradle or a soft floor let the bath move.

The most common problems we are called about are:

  • Impact holes in acrylic
  • Damage beneath the taps
  • Scratches you can feel with a fingernail
  • Chips caused by builders

What your quote should include

  • What happens if they find more damage
  • Whether cleaning and preparation are in the price
  • When it can be used again
  • Whether the price covers travel

10 questions to ask before booking

About our bath repair in Four Gates

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Whether it’s scuffs and scratches in the surface and cracks in an acrylic bath, we can help, on pressed steel enamel, cast iron enamel and whirlpool & spa baths alike.

Big or small, it’s backed by a one-year guarantee in Four Gates and across Bolton.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Where
Four Gates (BL5)
County
Bolton
Guarantee
12 months on all our work
Quotes
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026

Repair or replace: which is better?

Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.

Why book with us

  • Colours mixed by hand to suit your surface
  • CHAS and Constructionline accredited
  • We come to you, anywhere in the UK
  • Same prices wherever you are

See our prices page and bath cost comparison.

What your bath is made of matters

Cast iron

Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.

Composite and resin

Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.

What a repair cannot fix

It helps to know what we can’t do too:

  • Flexing caused by a failed cradle or loose feet
  • Wear across the entire surface, which needs re-enamelling
  • Leaking fittings, which need a plumber

If in doubt, send pictures and we’ll say what we think.

Materials we repair

  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths

Four Gates questions

Do you repair coloured baths?

Yes. The colour is mixed on site to suit your bath, including pastel and older colours.

Can you redo someone else’s repair?

Most of the time. Tell us what was done before.

What about rust by the waste?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

What information do you need?

A close-up, a wider photo and your postcode. Then we will agree a date.

Can I add another job to the visit?

Of course, and it normally saves money. Send pictures of everything together and you’ll get one combined price.

Do you charge for travel?

No. Our quotes include travel, and we charge the same wherever you are.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

How do I get a price for bath repair in Four Gates?

Prices start from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.

The process

You don’t need to empty the room. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. Most jobs take a morning or an afternoon, and you are welcome to carry on with your day while we work.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, generally the day after.

Before we arrive

  • Keep a parking space free if you can
  • Clear toiletries, mats and anything else from around the area
  • Let us know about parking or access

Get a quote

There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Send photos for a quote

Related advice

Landlord and trade work in Four Gates

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.

We carry out planned and one-off repairs for housing associations and facilities teams in Bolton and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.

Aftercare tips

So the finish stays in good condition:

  • If an acrylic bath flexes, have its feet adjusted
  • Get a dripping tap fixed promptly
  • Store metal items away from the bath
  • Stick to mild cleaners and a soft cloth

There’s nothing special to do after a repair, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.

Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.

Four Gates and the surrounding area

Four Gates is about 1 mile north-west of Westhoughton, in Bolton. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Four Gates is one of 61 towns and villages in Bolton we cover. We work right across the region, from Four Gates to Manchester (15 miles away).

Jobs in BL5 are booked in the same way as anywhere else. Other places close to Four Gates include Cooper Turning (1 mile north-west), Wingates (1 mile south-east), Middlebrook (1 mile north), Westhoughton (1 mile south-east) and Chew Moor (2 miles east). Within a short drive, we also cover Bolton (4 miles east), Halliwell (4 miles north-east), Farnworth (6 miles east), Daubhill (4 miles east), Great Lever (5 miles east) and Heaton (3 miles east).

What’s near Four Gates

Around Four Gates, we work in homes near The Gates Primary School, Church of St. John the Evangelist and Bolton Wanderers Free School and the streets around them. The nearest railway station is Horwich Parkway station, about 0.9 miles north of the centre. Other landmarks nearby include Hindley Museum (2.6 miles south-west) and Blackrod Castle Croft (2.3 miles north-west). The countryside around Four Gates includes Noon Hill.

Map of Four Gates © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.