Bolton · England

Non-Slip Bath Coating for Four Gates homes

We travel to Four Gates for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.

  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Four Gates

How we handle non-slip bath coating in Four Gates

It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. We regularly repair wet room floors (ask us), shower trays and enamelled baths, and common reasons people contact us are worn-out textured areas and safety for older or less mobile people.

Every repair comes with a one-year guarantee. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Location
Four Gates (BL5)
Region
Bolton
Guarantee
12 months on all our work
Quotes
Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Landlords, agents and businesses in Four Gates

Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

About Four Gates

Four Gates is about 1 mile north-west of Westhoughton, in Bolton. Our technicians come to homes and businesses in Four Gates and nearby villages, so there’s no workshop to go to. We work in all 61 towns and villages across Bolton, from the larger towns to small villages. Our jobs stretch from Four Gates to Manchester (15 miles away).

Postcode districts we cover here: BL5. Neighbouring places we cover include Cooper Turning (1 mile north-west), Wingates (1 mile south-east), Middlebrook (1 mile north), Westhoughton (1 mile south-east) and Chew Moor (2 miles east). We also work in nearby towns such as Bolton (4 miles east), Halliwell (4 miles north-east), Farnworth (6 miles east), Daubhill (4 miles east), Great Lever (5 miles east) and Heaton (3 miles east).

Local landmarks in Four Gates

Typical jobs here are in homes near The Gates Primary School, Church of St. John the Evangelist and Bolton Wanderers Free School, among other places. Four Gates’s nearest station is Horwich Parkway station, about 0.9 miles north of the centre. Nearby you’ll also find Hindley Museum (2.6 miles south-west) and Blackrod Castle Croft (2.3 miles north-west). Open spaces near Four Gates include Noon Hill.

Map of Four Gates © OpenStreetMap contributors

FAQs for Four Gates

Will a non-slip coating change how my bath looks?

Very little: the treated area looks slightly matt.

What does non-slip bath coating cost?

Every job gets a fixed quote based on photos of the damage. Send a close-up and a picture of the entire item with your BL5 postcode.

Which areas do you work in?

All of Bolton, and the rest of the UK. There is no extra charge for travel.

Can landlords book you?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

How do I book?

Use the quote form or ring 0345 017 0787, and we will take it from there.

Do the materials smell?

A little, depending on the job. Open windows and an extractor fan help.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

Signs you need non-slip bath coating in Four Gates

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Common reasons people in Four Gates contact us include:

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten

Comparing quotes

  • What preparation is included
  • When it can be used again
  • What happens if the damage is worse than the photos show
  • A fixed quote, and whether VAT is included

10 questions to ask before booking

Should you replace it?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

What you get with us

  • Every repair guaranteed for a year
  • Accredited with CHAS, Constructionline and SafeContractor
  • Free fixed quotes from pictures
  • One visit for most repairs

See our full price list.

How we price non-slip bath coating

We don’t charge extra for travel to Four Gates. The price comes down to:

  • Previous DIY repairs that have to come out
  • Unusual colours or finishes
  • How easy the damage is to reach
  • Whether it’s a chip, crack, burn or wear

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Getting a price from photos

You can take the photos on your phone, there is no need for anything special. Ensure they show:

  • Something in shot to show the size
  • The postcode, so we can plan the visit
  • A photo taken from further back
  • What it’s made of, if you know

For a price in Four Gates, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

What we do, step by step

The work is clean and fairly quiet, so you can stay at home while we’re there. Protection goes down first, then the job itself takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to care for it.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, normally overnight.

Before we arrive

  • Tell us about any previous repairs or coatings
  • Avoid using the area for a few hours before we arrive
  • Mention any parking restrictions or tricky access

How to get a price

Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.

Get a free quote

Advice

What a repair can’t fix

A repair is not right for every job, for example:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we will tell you honestly.

What we work on

  • Resurfaced baths
  • Enamelled baths
  • Acrylic baths
  • Shower trays
  • Wet room floors (ask us)
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.