Cambridgeshire · England
Bath Repair in Four Gotes
Problem with your bath in Four Gotes? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Chips caused by builders
- A chipped rim or side
Repair or replace in Four Gotes?
People frequently assume a cracked or chipped bath has to come out. Usually it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Prices start from £95. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why us?
- Work done at your home or business
- One price list for the entire UK
- Dust sheets down, tidy finish
- One visit for most repairs
Take a look at our pricing and guide to resurfacing and replacement costs.
How we handle bath repair in Four Gotes
Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour-matched so it blends in. Common call-outs are for rusty patches near the plughole and holes from dropped items, on pressed steel enamel, cast iron enamel and acrylic.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Where
- Four Gotes (PE13)
- County
- Cambridgeshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Plan for a morning or an afternoon from start to finish. Before we go, we will explain how long to leave it and how to care for it.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Before we arrive
- Mention any parking restrictions or tricky access
- Ensure the area is dry
- Ensure the room can be ventilated
Ask for a price
Most clients in Four Gotes get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Read more
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Four Gotes and the surrounding area
Four Gotes is about 4 miles north of Wisbech, in Cambridgeshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Four Gotes is one of 371 towns and villages in Cambridgeshire we cover.
We work across PE13 and the streets around it. We also travel to Tydd Gote (1 mile north), Foul Anchor (1 mile north-east), Tydd St Mary (1 mile north-west), Newton-in-the-Isle (1 mile south-west) and Tydd St Giles (2 miles west). We also work in nearby towns such as Wisbech (4 miles south), March (12 miles south), Wimblington (15 miles south), Leverington (3 miles south), Wisbech St Mary (6 miles south) and Walsoken (4 miles south-east).
Landmarks near Four Gotes
Further afield, we also cover the area around Wisbech Castle (4.4 miles south) and Fenland And West Norfolk Aviation Museum (3.6 miles south-east).
Honest limits
It helps to know what we can’t do too:
- A steel bath rusted through
- Cracks in acrylic we cannot reach from underneath
- A bath that moves underfoot, until its support is fixed
If in doubt, send pictures and we’ll say what we think.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
How to look after the repair
Aftercare is simple:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Rinse it down after each bath
- Cover the bath during DIY or decorating
- Don’t leave razors or cans standing in the bath
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
FAQs for Four Gotes
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
What does bath repair cost?
Prices start from £95. Because every job differs, we price from pictures. You will get a fixed figure before you book.
Do you charge for travel?
We do not add a call-out fee. Your fixed price includes everything.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Towns and villages near Four Gotes
What else we do in Four Gotes
What affects the price in Four Gotes
Repairs from £95. You won’t pay by the hour. The price is based on:
- Any earlier repairs that need removing first
- What the surface is made of
- The size and number of damaged areas
- Whether we combine several jobs
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed quote
When you take your pictures, these tips help us give you a firm price:
- Natural light rather than flash
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
