Cambridgeshire · England

Bath Re-enamelling for Four Gotes homes

Bath re-enamelling for Four Gotes, without a refit. Send us photos for a fixed quote, then book a visit.

  • Resurfacing from £350
  • A coloured bath you want in white
  • A dull, rough surface that will not come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Four Gotes

Bath re-enamelling in Four Gotes, done in place

The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. If you’re dealing with enamel that’s lost its shine and feels rough and a coloured bath you want in white, we can generally put it right, on acrylic baths, pressed steel baths and cast iron baths alike.

Whatever the size of the job, you get the same one-year guarantee.

Roll-top bath being refinished by a Surface Doctor technician
Where
Four Gotes (PE13)
County
Cambridgeshire
Guarantee
One year on every repair
Price
From £350. Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

What we do, step by step

Arrival times are agreed in advance, so you know when to expect us. On site, it takes a full day. We leave the room clean and ready to use once it has cured.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Clear the area around the damage
  • Tell us if there are stairs or a lift

Get a quote

If you’re in Four Gotes and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Send pictures for a quote

Related advice

Our work in Four Gotes

Four Gotes is about 4 miles north of Wisbech, in Cambridgeshire. Anywhere in PE13, a technician comes to you. Four Gotes is one of 371 towns and villages in Cambridgeshire we cover.

Our visits in PE13 work the same way as everywhere else we cover. Close by, we cover Tydd Gote (1 mile north), Foul Anchor (1 mile north-east), Tydd St Mary (1 mile north-west), Newton-in-the-Isle (1 mile south-west) and Tydd St Giles (2 miles west). Larger places within reach include Wisbech (4 miles south), March (12 miles south), Wimblington (15 miles south), Leverington (3 miles south), Wisbech St Mary (6 miles south) and Walsoken (4 miles south-east).

Around Four Gotes

Well-known places in the area include Wisbech Castle (4.4 miles south) and Fenland And West Norfolk Aviation Museum (3.6 miles south-east).

Map of Four Gotes © OpenStreetMap contributors

Common problems we fix in Four Gotes

Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.

Keep an eye out for any of the following:

  • A peeling or bubbling previous coating
  • Worn patches where water runs and sits
  • A bath in a colour that no longer suits
  • Chips and rust in more than one place

Comparing quotes

  • How to look after the finish
  • What protection goes down before work starts
  • Whether cleaning and preparation are in the price
  • Whether there are any call-out or travel charges

Our hiring checklist

Aftercare tips

Aftercare is simple:

  • Rinse off hair dye, oils and bath bombs immediately
  • Respect the curing time we give you
  • Repair dripping taps early
  • Get any chip repaired quickly

Dry the bath after use if possible, and rinse away any product left on the surface.

Don’t try to scrub a worn bath back to shine. It removes more of the surface.

Landlord and trade work in Four Gotes

If you manage property in Four Gotes, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

What we cannot put right

It helps to know what we can’t do:

  • Plumbing leaks, which need a plumber
  • Holes rusted through the metal
  • Problems we can’t see until an old finish comes off

If in doubt, send pictures and we’ll say what we think.

Materials we repair

  • Pressed steel baths
  • Victorian roll-tops
  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths

Repairing versus replacing in Four Gotes

Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.

Why book with us

  • One price list for the entire UK
  • Fixed prices from your photos
  • Work done at your home or business
  • Colours mixed by hand to suit your surface

Take a look at our pricing or bath cost comparison.

Four Gotes: your questions answered

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

What happens next?

We come back with a fixed price, plus dates. There is no obligation to book.

What if the damage is worse than the photos show?

We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

Can I add another job to the visit?

Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.

Is a repair better than a new one?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.

Can you fix a peeling bath coating?

Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.

How long does re-enamelling take?

Most baths are done in a day and can be used the day after. We will confirm timings when we quote.

Can you price it without visiting?

In nearly every case. If pictures do not show enough, we will ask for another angle.

What bath re-enamelling costs

Prices start from £350. We charge the same across the UK, including Four Gotes. The price reflects:

  • The material
  • How many areas need work
  • The colour and finish to match
  • Any earlier repairs that need removing first

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.

Quotes from your photos

You can take the pictures on your phone. Make sure they show:

  • The postcode, so we can plan the visit
  • Something in shot to show the size
  • A photo taken from further back
  • Any earlier repairs or coatings

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.