Oxfordshire · England

Bath chip & crack repair in Frilford, Oxfordshire

Damaged bath in Frilford? We put it right where it is, mix the colour on the day and guarantee the work for a year.

  • Repairs from £95
  • Damage beneath the taps
  • Chips along the edge of the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Frilford

FAQs for Frilford

When can I have a bath again?

Generally the following day. We confirm the time before we leave.

What happens once I’ve sent photos?

We review the photos and send a fixed quote.

When can you do it?

That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.

I rent my home. Can I book you?

Yes. Check with your landlord; we can send the quote to them too.

Is there a guarantee?

All our work carries a one-year guarantee. We’ll explain what it covers when we quote.

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children.

How invisible is a bath repair?

On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

About our bath repair in Frilford

We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the next day. Common call-outs are for a kit repair that didn’t last and rust spots around the plughole, on pressed steel enamel, cast iron enamel and whirlpool & spa baths.

All of our repairs are guaranteed for twelve months in Frilford and everywhere else. If something goes wrong with the work, we come back.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Where
Frilford (OX13)
County
Oxfordshire
Warranty
One year on every repair
Price
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Signs you need bath repair in Frilford

The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.

Send us a photo if you notice any of these:

  • Hairline or through cracks in acrylic
  • A failed DIY repair that is discoloured or lifting
  • Chips caused by builders
  • A hole punched through by something heavy

Questions to ask before booking

  • Who turns up on the day
  • How long the guarantee is and what it covers
  • How your room will be protected
  • Is the price fixed, and does it include VAT?

Choosing a repair company

What affects the price in Frilford

Prices start from £95. Quotes are free and the price is fixed. What we look at:

  • How much damage there is
  • How easy the damage is to reach
  • How many items we do on one visit
  • Any earlier repairs that need removing first

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.

How to get a fixed price

When you take your photos, these tips help us give you a firm price:

  • Something in shot to show the size
  • What it’s made of, if you know
  • Where you are, by postcode
  • A picture taken from further back

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.

Looking after it afterwards

Much of the damage we repair could have been avoided. A few tips:

  • Clean with warm water and a mild detergent
  • Cover the bath during DIY or decorating
  • Check that an acrylic bath does not move when you stand in it
  • Rinse it down after each bath

Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.

DIY repairs versus a professional job

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

How it works

The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the work takes a few hours, depending on the damage. At the end we talk you through how soon it can be used and how to care for it.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Before we arrive

  • Have a window or extractor fan available
  • Avoid using the area for a few hours before we arrive
  • Let us know which floor the room is on

Getting a price

Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and you are under no obligation.

Get a free quote

Advice

What we can’t put right

To be straight with you, some problems need a different fix:

  • Rust that has eaten right through a steel bath
  • Cracks in acrylic we can’t reach from underneath
  • Wear across the entire surface, which needs re-enamelling

If in doubt, send pictures and we’ll say what we think.

What we work on

  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel
  • Cast iron enamel
  • Whirlpool & spa baths

Our work in Frilford

Frilford is about 3 miles west of Abingdon-on-Thames, in Oxfordshire. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Frilford is one of 443 places in Oxfordshire we cover. Our nearest city page is London, about 56 miles away.

All of OX13 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Oxford Road and Kingston Road and the roads around them. Other places close to Frilford include Frilford Heath (1 mile north), Marcham (1 mile east), Tubney (1 mile north), Fyfield (2 miles north-west) and Netherton (2 miles north-west). Further out, we also cover Oxford (8 miles north-east), Didcot (7 miles south-east), Abingdon-on-Thames (3 miles east), Witney (10 miles north-west), Carterton (12 miles north-west) and Wantage (6 miles south-west).

What’s near Frilford

Typical jobs here are in homes near The White Hart Public House, Church of All Saints and Abingdon Preparatory School. Further afield, we also cover the area around FitzHarris Castle (3.4 miles east) and Abingdon Community Hospital (2.6 miles east). For a walk, there is Hitchcopse Pit and Cumnor Hill.

Map of Frilford © OpenStreetMap contributors

Repair or replace: which is better?

Many people think a damaged bath means a new one. In most cases it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Our bath repair starts from £95. We charge the same wherever you are, so there is no premium for Frilford. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why book with us

  • Colour-matched on site
  • We will tell you if it’s not worth repairing
  • Nothing taken out or refitted
  • Same prices wherever you are

See our pricing or resurfacing vs replacement cost guide.

Landlord and trade work in Frilford

If you manage property in Frilford, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.