East Sussex · England
Bath Repair for Furner's Green homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Furner's Green, with a one-year guarantee on every repair.
- Repairs from £95
- A kit repair that didn’t last
- Holes from dropped items
Our work in Furner's Green
Furner's Green is about 5 miles east of Haywards Heath, in East Sussex. Whether you’re in the middle of Furner's Green or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Furner's Green is one of 289 towns and villages in East Sussex we cover. You can also see our page for London, about 34 miles away.
All of TN22 is covered. From Tanyard Lane and Slider's Lane or anywhere nearby, we can come to you. If you’re just outside Furner's Green, we cover Danehill (1 mile north), Chelwood Common (2 miles north), Horsted Keynes (2 miles north-west), Chelwood Gate (2 miles north) and Nutley (2 miles north-east). Within a short drive, we also cover Lewes (10 miles south), Hailsham (15 miles south-east), Crowborough (7 miles east), Uckfield (5 miles south-east), Newhaven (15 miles south) and Peacehaven (15 miles south).
Local landmarks in Furner's Green
Our clients here include homes close to Sheffield Park Garden, The Parish Church of All Saints and Danehill Church of England Primary School and the streets around them. Furner's Green’s nearest station is Haywards Heath station, roughly 5 miles west. Other landmarks nearby include Princess Royal Hospital (4.6 miles west) and Waterbury Castle (2.5 miles north-west). Not far away are Brickfield Meadow.
About our bath repair in Furner's Green
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, usually in a single visit. We’re frequently asked to fix snagging damage from a refit and chips along the edge of the bath, in roll-top & freestanding, cast iron enamel and whirlpool & spa baths.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Where
- Furner's Green (TN22)
- Area hub
- East Sussex
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace in Furner's Green?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Our bath repair starts from £95. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before booking.
What you get with us
- Honest advice, even when it means no job
- Same prices wherever you are
- Work done at your home or business
- Colour-matched on site
See our prices page and guide to resurfacing and replacement costs.
How the visit works
Your technician turns up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a few hours, and we leave the room as we found it.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
Before we arrive
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
- Let us know about parking or access
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
What bath repair costs
Repairs from £95. Each job gets its own fixed price. This is what makes a difference:
- How many items we do on one visit
- Where the damage is and how we get to it
- The material and finish
- How hard the colour is to match
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Quotes from your photos
You can take the pictures on your phone. Just ensure we can see:
- A close-up of the damage, in focus
- Natural light rather than flash
- One picture of the whole bath
- Where you are, by postcode
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Furner's Green questions
Which areas do you work in?
All of East Sussex, and the rest of the UK. There’s no extra charge for travel.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across East Sussex.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you come to Furner's Green?
Yes. We work across the UK and travel to Furner's Green and the rest of East Sussex. Send photos and we’ll quote, or call 0345 017 0787.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can you repair a hole in a bath?
Frequently, if there’s access underneath. The hole is backed, filled and refinished to match.
Also near Furner's Green
Also in Furner's Green
Common problems we fix in Furner's Green
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water collects there, so chips nearby rust quickly.
These are the problems we’re asked about most:
- Chips on the rim or sides
- Rust by the waste and overflow
- Hairline or through cracks in acrylic
- Impact holes in acrylic
What to look for in a quote
- Whether cleaning and preparation are in the price
- Who turns up on the day
- How your room will be protected
- How the colour is matched
Keeping it looking good
To keep it looking its best for years:
- Have new chips seen to early
- Clean with warm water and a mild detergent
- Get a dripping tap fixed promptly
- Rinse the bath after use, especially in hard water areas
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
Work for landlords and builders
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
What a repair can’t fix
A repair is not right for every job, for example:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that moves underfoot, until its support is fixed
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
