Moray · Scotland
Bath Repair for Garmouth homes
Our technicians come to Garmouth for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Cracks in an acrylic bath
- A chipped rim or side
Bath repair in Garmouth, done in place
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We are frequently asked to fix an old repair that has yellowed or come loose and chips on the rim or sides, in acrylic, whirlpool & spa baths and pressed steel enamel.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.
- Area
- Garmouth (IV32)
- County
- Moray
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Garmouth
Garmouth is about 5 miles west of Buckie, in Moray. Our repair technicians come to clients in Garmouth and the surrounding area, so there is no workshop to go to. We work in all 58 towns and villages across Moray, from the larger towns to small villages.
All of IV32 is covered, from the main roads to the quietest streets. Local streets include Station Road, High Street and Green Road. We also cover the places around Garmouth: Kingston (1 mile north), Nether Dallachy (1 mile east), Bogmoor (2 miles south-east), Upper Dallachy (2 miles south-east) and Mosstodloch (3 miles south). We also work in nearby towns such as Elgin (7 miles west), Buckie (5 miles east), Lossiemouth (8 miles north-west), Keith (10 miles south-east), Ashgrove (7 miles west) and Portknockie (10 miles east). For island and remote addresses, call first so we can plan the visit.
What’s near Garmouth
Typical jobs here are in homes near Garmouth Church and the streets around them. Further afield, we also cover the area around Fochabers Folk Museum (3.5 miles south) and Gordon Castle (3.1 miles south). Not far away are The Lake.
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Clean with warm water and a mild detergent
- Have new chips seen to early
- Keep metal cans and razors off the surface
- Give the bath a quick rinse after use
Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.
What we are called out for in Garmouth
Heavy toiletries are the biggest single cause of chips. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Keep an eye out for these signs:
- Rust spots around the plughole
- Scratches you can feel with a fingernail
- Impact holes in acrylic
- Chips along the edge of the bath
What to look for in a quote
- Aftercare advice
- Whether cleaning and preparation are in the price
- How the colour is matched
- Is the price fixed, and does it include VAT?
Nearby places to Garmouth
What else we do in Garmouth
Landlord and trade work in Garmouth
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
How it works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a few hours, depending on the damage, depending on what we find, and we finish by cleaning up and talking you through the result.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Plan for the room to be out of bounds to pets and children
- Move bottles, mats and clutter away from the area
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Advice
Prices and what affects them
Repairs from £95. Quotes are free and the price is fixed. What we take into account:
- The type of damage
- How many areas need work
- The material and finish
- Access to the area
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed price
You can take the pictures on your phone. Ensure they show:
- Natural light rather than flash
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Repair or replace in Garmouth?
Replacing a bath rarely stops at the bath: tiles along the rim usually crack when it comes out, a new panel is often needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- Rooms protected and left tidy
- Straight answers about what a repair can do
Take a look at our prices page or resurfacing vs replacement cost guide.
Garmouth: your questions answered
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
What happens next?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
When can I have a bath again?
Generally within a day, though it depends on what we have done.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.
Do you come to Garmouth?
Yes. We work across the UK and come to Garmouth and the rest of Moray. Send us photos for a fixed quote, or call 0345 017 0787.
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
Send us pictures and we will tell you honestly before you book.
Surfaces we repair
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
