Isle of Wight · England
Bath Repair for Gatcombe homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Gatcombe and across Isle of Wight. Free, fixed quotes from your pictures.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Impact holes in acrylic
Bath repair in Gatcombe without replacing anything
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath. Most baths can be used again the following day. We’re often asked to fix hairline or through cracks in acrylic and rusty patches near the plughole, in roll-top & freestanding, cast iron enamel and pressed steel enamel.
Whatever the size of the job, it’s backed by a one-year guarantee in Gatcombe and across Isle of Wight.
- Where
- Gatcombe (PO30)
- County
- Isle of Wight
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath repair
Repairs from £95. A fixed quote means you know the cost before you book. We look at:
- Any earlier repairs that need removing first
- Whether we combine several jobs
- How hard the colour is to match
- The material and finish
Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from photos
When you take your pictures, these tips help us give you a firm price:
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Our work in Gatcombe
Gatcombe is about 2 miles south of Newport, in Isle of Wight. Clients in Gatcombe get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. We work in 125 places in Isle of Wight. Our nearest city page is London, about 78 miles away.
Every address in PO30 is within our area. From Gatcombe Road, Rectory Lane and Newbarn Lane or anywhere nearby, a technician can come to you. We also cover the places around Gatcombe: Chillerton (1 mile south), Plaish (2 miles north-west), Clatterford (2 miles north), Bowcombe (2 miles north-west) and Carisbrooke (2 miles north). We also work in nearby towns such as Ryde (8 miles north-east), Cowes (6 miles north), Sandown (6 miles east), Shanklin (6 miles east), Ventnor (6 miles south-east) and East Cowes (6 miles north). For island and remote addresses, call first so we can plan the visit.
Near you in Gatcombe
We visit homes around Chillerton and Rookley Primary School, Christ The King College and St. Olave's Church and the streets around them. Well-known places in the area include Carisbrooke Castle (1.6 miles north) and Isle of Wight Music Museum (2.5 miles north). Not far away are Briddlesford Nature Reserve and Brighstone Down.
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
How it works
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a morning or an afternoon, depending on what we find, and we finish by cleaning up and talking you through the result.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Point us to the nearest place to park
- Let the surface dry out before the visit
- Clear toiletries, mats and anything else from around the area
Ask for a price
Send us photos of the damage and a wider shot of the entire item, with your PO30 postcode, and we will come back with a fixed quote.
Related advice
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Nearby places to Gatcombe
More services for Gatcombe
What a repair cannot fix
A repair is not always the answer, and we will tell you before we start. Repairs will not solve:
- Cracks in parts of an acrylic bath we can’t get to from below
- Water coming from the waste or taps rather than the bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send photos and we will say what we think before booking.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
Aftercare tips
To keep it looking its best for years:
- Avoid scourers, wire wool and gritty cream cleaners
- Use a soft cloth and washing-up liquid for everyday cleaning
- Fix dripping taps early to stop staining and limescale
- Ensure an acrylic bath is firm underfoot
There is nothing special to do after a repair. Skip bleach and gritty creams and give it a rinse after each bath.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Common questions in Gatcombe
Is it safe with children and pets around?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Can you repair a hole in a bath?
In most cases. Send us a picture of the hole and one from under the bath if you can.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
What areas do you cover?
The entire UK, including all of Isle of Wight. Send your postcode with your photos and we will offer you dates.
How do I book?
Photos of the damage, a photo of the entire bath and your postcode. Then we’ll agree a date.
Landlords, agents and businesses in Gatcombe
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Repairing versus replacing in Gatcombe
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not where you live. You will see the full price before booking.
Why choose Surface Doctor in Gatcombe
- Technicians who travel to you, UK-wide
- Free fixed quotes from pictures
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
See our full price list or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
