East Ayrshire · Scotland
Bath Repair in Gatehead
Bath repair in Gatehead without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- A chipped rim or side
- A chip where the taps sit
How we handle bath repair in Gatehead
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, the tiles aren’t touched, and the repaired area is colour-matched so it blends in. Whether it’s a kit repair that didn’t last and chips on the rim or sides, we can usually put it right, on roll-top & freestanding, cast iron enamel and pressed steel enamel alike.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Location
- Gatehead (KA2)
- Area hub
- East Ayrshire
- Cover
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Gatehead. The job itself decides the price: the material, the amount of damage and how many items.
Why choose Surface Doctor in Gatehead
- CHAS and Constructionline accredited
- Colour-matched on site
- A year’s guarantee on all work
- A fixed quote before you book
See our prices page or resurfacing vs replacement cost guide.
Gatehead questions
Can pets and children be at home?
On the day, the room should be kept clear of pets and children.
What happens once I’ve sent pictures?
We review the pictures and send a fixed quote with dates.
Can a cracked acrylic bath be fixed?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Is my repair covered?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which generally takes two to three hours for most chips. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
- Clear toiletries, mats and anything else from around the area
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Advice
Nearby places to Gatehead
What else we do in Gatehead
What affects the price in Gatehead
Repairs from £95. We give every job a fixed quote from photos. These are the things that affect it:
- Where the damage is and how we get to it
- The size and number of damaged areas
- The colour and finish to match
- What kind of damage it is
A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with no extras added later.
Send pictures for a quote
Two or three clear photos are normally enough. Try to include:
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- Where you are, by postcode
- Details of any past repairs
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
About Gatehead
Gatehead (Gaelic: Port-nah-Abhainne) is about 3 miles south-west of Kilmarnock, in East Ayrshire. Whether you’re in the middle of Gatehead or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Gatehead is one of 53 places in East Ayrshire we cover. Our nearest city page is Glasgow, about 21 miles away.
Every address in KA2 is covered, from the main roads to the quietest streets. Streets in the area include Fairlie View, Moorfield Place and Milton View. If you’re just outside Gatehead, we cover Crosshouse (1 mile north), Dundonald (2 miles south-west), Bonnyton (2 miles north-east), Annanhill (2 miles north-east) and Drybridge (2 miles west). Within a short drive, we also cover Kilmarnock (3 miles north-east), Stewarton (6 miles north), Cumnock (15 miles south-east), Galston (7 miles east), Mauchline (9 miles south-east) and New Farm Loch (4 miles north-east).
Local landmarks in Gatehead
We visit homes around Grange Academy, among other places. The nearest railway station is Kilmarnock station, about 2.6 miles north-east. Nearby you’ll also find University Hospital Crosshouse (1.6 miles north-east) and Caprington Castle (1.1 miles east). Not far away are Caprington Loch.
What we can’t put right
It helps to know what we can’t do:
- A steel bath rusted through
- Cracks in parts of an acrylic bath we cannot get to from below
- Wear across the whole surface, which needs re-enamelling
Send us pictures and we will tell you honestly before booking.
Materials we work on in Gatehead
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
How to look after the repair
Looking after the surface is easy:
- Keep abrasive pads and gritty cleaners away from the bath
- Give the bath a quick rinse after use
- Do not leave a fresh chip for long
- Keep metal cans and razors off the surface
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
For landlords and businesses
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
About our accreditations · Every repair comes with a one-year guarantee.
