Powys · Wales
Bath chip & crack repair in Glyntawe, Powys
Problem with your bath in Glyntawe? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Chips under the taps
- A chipped rim or side
Bath repair at your home in Glyntawe
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, the tiles are not touched, and the repaired area is colour matched so it blends in. We regularly repair whirlpool & spa baths, acrylic and roll-top & freestanding, and common reasons people get in touch are rust by the waste and overflow and damage done while the bathroom was being fitted.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Location
- Glyntawe (SA9)
- Region
- Powys
- Guarantee
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- If an acrylic bath flexes, have its feet adjusted
- Get a dripping tap fixed promptly
- Clean with warm water and a mild detergent
- Do not leave razors or cans standing in the bath
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Take it off before we arrive.
Also in Glyntawe
Landlords, agents and businesses in Glyntawe
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
Glyntawe questions
What does bath repair cost?
Repairs from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is a cracked acrylic bath repairable?
Generally, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Will the repair show?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Can you price it without visiting?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Something went through my bath. Can it be fixed?
Frequently, if there is access underneath. The hole is backed, filled and refinished to match.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What affects the price in Glyntawe
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- Doing more than one item at once
- How easy the damage is to reach
- The size and number of damaged areas
- What kind of damage it is
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before booking.
Send photos for a quote
You can normally get a fixed quote without us visiting. To help us price it:
- One sharp close-up of the damage
- A wider photo showing the whole bath
- The postcode, so we can plan the visit
- Natural light rather than flash
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Our work in Glyntawe
Glyntawe is about 13 miles north-west of Aberdare, in Powys. We visit homes and businesses in Glyntawe, so there is no workshop to go to. Glyntawe is one of 234 places in Powys where we work.
Postcode districts we cover here: SA9. Nearby, we also work in Ynyswen (2 miles south), Caehopkin (3 miles south-west), Powys (3 miles south), Coelbren (3 miles south) and Abercrave (3 miles south-west). Further out, we also cover Brecon (14 miles north-east), Ystalyfera (7 miles south-west), Ystradgynlais (5 miles south-west), Llanfaes (14 miles north-east), Y Gurnos (6 miles south-west) and Pendre (14 miles north-east).
Around Glyntawe
Around Glyntawe, we work in homes near Gwyn Arms, among other places. Nearby you’ll also find Gaer Fan Foel (3.7 miles north-west). The countryside around Glyntawe includes Pant Mawr Pool and Twynwalter.
When to call us in Glyntawe
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
If you can see any of these, send us a picture:
- Hairline or through cracks in acrylic
- A hole punched through by something heavy
- Damage beneath the taps
- Chips along the edge of the bath
Comparing quotes
- Aftercare advice
- A fixed price, and whether VAT is included
- What preparation is included
- Whether the colour is mixed to match
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
Why repair rather than replace?
Many people think a damaged bath means a new one. In most cases it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Prices start from £95. Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- Free fixed quotes from pictures
- Every repair guaranteed for a year
- Colour-matched on site
- One price list for the entire UK
Read our prices page and bath cost comparison.
The process
We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, depending on the damage, and we leave the room as we found it.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Clear the area around the damage
- Let us know about parking or access
- Make sure the room can be ventilated
Ask for a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
