Powys · Wales
Bath chip & crack repair in Ynyswen, Powys
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Ynyswen and across Powys. Free, fixed quotes from your photos.
- Repairs from £95
- Rust by the waste and overflow
- Scuffs and scratches in the surface

How we handle bath repair in Ynyswen
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for rust spots around the plughole and a chipped rim or side, in roll-top & freestanding, cast iron enamel and pressed steel enamel.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.
- Where
- Ynyswen (SA9)
- Area hub
- Powys
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026

Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- A dripping tap stains enamel, so fix it early
- Avoid scourers, wire wool and gritty cream cleaners
- Don’t leave razors or cans standing in the bath
- Rinse it down after each bath
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
What affects the price in Ynyswen
Repairs from £95. A fixed quote means you know the cost before booking. We look at:
- What kind of damage it is
- The material and finish
- Any earlier repairs that need removing first
- How many areas need work
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Send photos for a quote
When you take your photos, these tips help us give you a firm price:
- A coin beside the damage so we can judge size
- Where you are, by postcode
- Natural light rather than flash
- Whether it’s been repaired or coated before
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a few hours, depending on the damage. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
- Keep children and pets away from the room on the day
Get a quote
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Read more
Our work in Ynyswen
Ynyswen is about 11 miles north-east of Neath, in Powys. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Ynyswen is one of 234 towns and villages in Powys we cover.
Postcode districts we cover here: SA9. That includes homes on Riverside Gardens and Cribarth. We also cover the places around Ynyswen: Caehopkin (1 mile south-west), Powys (1 mile south), Coelbren (1 mile south-east), Pant-y-cwrt (1 mile south-west) and Abercrave (1 mile west). We also work in nearby towns such as Ystalyfera (5 miles south-west), Ystradgynlais (3 miles south-west), Y Gurnos (4 miles south-west), Penrhos (3 miles south-west), Cwmllynfell (6 miles west) and Pant-y-ffynnon (6 miles south-west).
Local landmarks in Ynyswen
Typical jobs here are in homes near The Ancient Briton Hotel. A little further out are Cae'r Castell (3.8 miles south-west) and Ystradgynlais Community Hospital (4.2 miles south-west). The countryside around Ynyswen includes Pant Mawr Pool and Cribarth.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Ynyswen: your questions answered
Can you repair a failed DIY repair?
Regularly. We strip it out, deal with any rust and repair it again.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
What happens once I’ve sent photos?
We come back with a fixed price. There is no obligation to book.
How long does the repair take to cure?
Typically within a day, depending on the repair.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Repair or replace in Ynyswen?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why Ynyswen customers choose us
- Honest advice, even when it means no job
- A fixed quote before you book
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
See our pricing or bath cost comparison.
When we would advise against a repair
It helps to know what we can’t do too:
- A bath worn all over, where resurfacing makes more sense
- Metal that has corroded all the way through
- Water coming from the waste or taps rather than the bath
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
Signs you need bath repair in Ynyswen
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
Signs it’s time to call us include:
- Rusty patches near the plughole
- Chips under the taps
- Snagging damage from a refit
- Holes from dropped items
Questions to ask before you book
- A fixed price, and whether VAT is included
- Whether the price covers travel
- Who will actually do the work
- What preparation is included
Work for landlords and builders
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
What else we do in Ynyswen
About our accreditations · Every repair comes with a one-year guarantee.

