Cornwall · England

Bath chip & crack repair in Godolphin Cross, Cornwall

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Godolphin Cross and across Cornwall. Send photos for a free, fixed quote.

  • Repairs from £95
  • A failed DIY repair that is discoloured or lifting
  • Chips caused by builders
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Godolphin Cross

How to care for the repair

Most damage we see is avoidable. A few tips:

  • Cover the bath during DIY or decorating
  • Make sure an acrylic bath is firm underfoot
  • A dripping tap stains enamel, so fix it early
  • Avoid scourers, wire wool and gritty cream cleaners

Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.

Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.

Bath repair at your home in Godolphin Cross

Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We work on roll-top & freestanding, cast iron enamel and pressed steel enamel, and common reasons people contact us are a cracked acrylic bath and scuffs and scratches in the surface.

You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.

Where
Godolphin Cross (TR13)
Region
Cornwall
Cover
A year, on every repair
Quotes
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Work for landlords and builders

If you manage property in Godolphin Cross, we will quote for several properties at once. Just send photos for each address and we’ll price them together.

We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.

How it works

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes two to three hours for most chips. We tidy up before we leave and tell you when it’s ready to use.

  1. We clean the area and remove any loose enamel or rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. The colour is mixed on the spot to match your bath.
  4. We apply the finish coats and polish the repair so it blends in.
  5. Once it has cured, generally by the next day, the bath is ready to use.

Before we arrive

  • Move bottles, mats and clutter away from the area
  • Mention if the room is upstairs or in a flat
  • Avoid using the area for a few hours before we arrive

Get a quote

You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Send photos for a quote

Advice

How we price bath repair

Prices start from £95. We give every job a fixed quote from pictures. This is what makes a difference:

  • Where the damage is and how we get to it
  • Previous DIY repairs that have to come out
  • What kind of damage it is
  • How hard the colour is to match

Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

How to get a fixed price

A couple of clear pictures is all it takes. It helps if you send:

  • A clear, close picture of the problem area
  • A photo taken from further back
  • Details of any past repairs
  • A coin or ruler next to the damage for scale

We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.

Repairs by material

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.

About Godolphin Cross

Godolphin Cross is about 4 miles north-west of Helston, in Cornwall. We visit homes and businesses in Godolphin Cross and nearby villages, so there’s no workshop to go to. Godolphin Cross is one of 644 places in Cornwall we cover.

We cover every part of TR13 and the streets around it. We regularly work on streets such as Herland Road and Forth Vean and the roads around them. We also travel to Townshend (1 mile north-west), Drym (1 mile north-east), Ashton (2 miles south), Penhale Jakes (2 miles south) and Breage (2 miles south). Larger places within reach include Falmouth (12 miles east), Camborne (6 miles north-east), Redruth (9 miles north-east), Penzance (9 miles west), Helston (4 miles south-east) and Hayle (5 miles north-west).

What’s near Godolphin Cross

Around Godolphin Cross, we work in homes near The Godolphin Arms Public House, Godolphin Primary School and Carleen Community Church. The closest station to Godolphin Cross is Hayle station, roughly 4.8 miles north-west of the centre. Other landmarks nearby include St Michael's Hospital (4.6 miles north-west) and National Museum Of Gardening (1.8 miles east). Green spaces nearby include The Loe and Godolphin Hill.

Map of Godolphin Cross © OpenStreetMap contributors

FAQs for Godolphin Cross

Will I be able to see the repair?

On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.

Can a cracked acrylic bath be fixed?

In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.

How do I book?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

What happens once I’ve sent photos?

We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Cornwall.

Do you need bath repair in Godolphin Cross?

Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal will start to rust.

Send us a picture if you notice any of these:

  • Scratches you can feel with a fingernail
  • A cracked acrylic bath
  • Rust spots around the plughole
  • An old repair that has yellowed or come loose

Before booking anyone

  • Aftercare advice
  • Whether cleaning and preparation are in the price
  • Whether the price is fixed and includes VAT
  • If travel is included in the price

How to compare quotes

Why repair rather than replace?

Many people think a damaged bath means a new one. In most cases it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Prices start from £95. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why book with us

  • Everything repaired in place
  • Generally one visit, start to finish
  • Work done at your home or business
  • One price list for the entire UK

Read our prices page and bath cost comparison.

When a repair is not the answer

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • Leaking fittings, which need a plumber
  • Metal that has corroded all the way through
  • A bath that moves underfoot, until its support is fixed

Send us pictures and we will tell you honestly before booking.

Surfaces we repair

  • Cast iron enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.