Warwickshire · England
Bath chip & crack repair in Goldicote, Warwickshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Goldicote, with a one-year guarantee on every repair.
- Repairs from £95
- Scuffs and scratches in the surface
- Chips on the rim or sides
How we handle bath repair in Goldicote
We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands with a one-year guarantee. Common call-outs are for an old repair that has yellowed or come loose and chips along the edge of the bath, on acrylic, whirlpool & spa baths and roll-top & freestanding.
You get a one-year guarantee, the same in Goldicote as everywhere else we work.
- Area
- Goldicote (CV37)
- Area hub
- Warwickshire
- Guarantee
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Should you replace it?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. A repair keeps it in place. Prices start from £95. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- Work done at your home or business
- Straight answers about what a repair can do
- A year’s guarantee on all work
- We leave the room as we found it
Take a look at our prices page or guide to resurfacing and replacement costs.
Our work in Goldicote
Goldicote is about 4 miles south-east of Stratford-upon-Avon, in Warwickshire. We travel to homes and businesses in Goldicote, so there’s no workshop to go to. Goldicote is one of 324 places in Warwickshire where we work. You can also see our page for Birmingham, about 24 miles away.
All of CV37 is covered. Whether you live on Banbury Road and Blue Lane or a nearby road, a technician can come to you. Other places close to Goldicote include Loxley (1 mile north-east), Alderminster (2 miles south-west), Ettington (2 miles south-east), Whitchurch (3 miles south-west) and Newbold-on-Stour (3 miles south). We also work in nearby towns such as Warwick (9 miles north), Royal Leamington Spa (10 miles north-east), Stratford-upon-Avon (4 miles north-west), Leamington Spa (10 miles north-east), Kenilworth (13 miles north) and Southam (13 miles north-east).
What’s near Goldicote
Our clients here include homes close to Loxley CofE Community Primary School. The closest station to Goldicote is Stratford-upon-Avon station, about 4.1 miles north-west. Other landmarks nearby include Temple Hill (4.1 miles north-west) and Stratford Hospital (4 miles north-west).
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Towns and villages near Goldicote
Other services in Goldicote
What a repair can’t fix
In fairness, some problems need a different fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
What we do, step by step
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes two to three hours for most chips, and we finish by cleaning up and talking you through the result.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Open a window if you can
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
How to get a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Advice
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Common problems we fix in Goldicote
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
People generally call us when they notice one of these:
- Holes from dropped items
- A chip where the taps sit
- Deep scratches in acrylic
- A kit repair that didn’t last
Comparing quotes
- What aftercare is recommended
- What prep work is covered
- How changes to the job are handled
- How long it needs to cure
Aftercare tips
Simple care helps the repair last. We recommend:
- Do not leave razors or cans standing in the bath
- Rinse it down after each bath
- Do not scrub with anything abrasive
- Cover the bath during DIY or decorating
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Questions from Goldicote
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
What happens once I’ve sent photos?
We review the pictures and send a fixed quote and the next dates we have.
Do you come to Goldicote?
Yes. We cover the whole UK and travel to Goldicote. Send pictures and we’ll quote, or call 0345 017 0787.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is repairing better than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and you will get one combined price.
How invisible is a bath repair?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
About our accreditations · Every repair comes with a one-year guarantee.
