Kirklees · England
Bath chip & crack repair in Gomersal, Kirklees
Bath repair across Gomersal and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Cracks in an acrylic bath
- A failed DIY repair that is discoloured or lifting
How we handle bath repair in Gomersal
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. Our repair technicians work on acrylic, whirlpool & spa baths and pressed steel enamel, and common reasons people contact us are damage done while the bathroom was being fitted and a chip where the taps sit.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Location
- Gomersal (BD19)
- Region
- Kirklees
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to two to three hours for most chips, including clearing up.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, typically by the following day, the bath is ready to use.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Keep children and pets away from the room on the day
- Ensure the room can be ventilated
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Advice
Looking after it afterwards
To keep it looking its best:
- Put a towel in the bath if you are working above it
- Avoid scourers, wire wool and gritty cream cleaners
- Make sure an acrylic bath is firm underfoot
- Clean with warm water and a mild detergent
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
FAQs for Gomersal
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before and we’ll plan for it.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you cover the whole of Kirklees?
We cover the entire UK, including Gomersal and the rest of Kirklees. Just include your postcode and we will offer you dates.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Will I be able to see the repair?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
Honest limits
Not everything can be repaired, and we will tell you before we start. Repairs will not solve:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
- A bath worn all over, where resurfacing makes more sense
Send us pictures and we will tell you honestly before booking.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
Our work in Gomersal
Gomersal is about 1 mile east of Cleckheaton, in Kirklees. Anywhere in BD19, a technician comes to you. Gomersal is one of 189 towns and villages in Kirklees where we work. We work right across the region, from Gomersal to Leeds (about 8 miles away).
Jobs in BD19 work the same way as everywhere else we cover. Local streets include Shirley Square, Grove Square and Pollard Avenue, and we cover them all. Gomersal sits on or near the A651, which makes travel easy. We also travel to Littletown (1 mile south), Birstall (1 mile east), Liversedge (1 mile south), Millbridge (1 mile south) and Heckmondwike (2 miles south-east). We also work in nearby towns such as Huddersfield (7 miles south-west), Dewsbury (4 miles south-east), Mirfield (3 miles south), Meltham (12 miles south-west), West Town (4 miles south-east) and Lockwood (8 miles south-west).
Landmarks near Gomersal
Around Gomersal, we work in homes near Church of St Mary, West End pub and BBG Academy and the streets around them. You will also find Wilton Park (1.6 miles east) and Gomersal Primary School (under half a mile east). For rail, the closest station is Low Moor station, roughly 3 miles north-west. Nearby you will also find Transperience (2.9 miles north-west) and Oakwell Hospital (1.9 miles north-east). For a walk, there’s Post Hill.
Signs you need bath repair in Gomersal
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal will start to rust.
The things clients usually mention when they call include:
- A failed DIY repair that’s discoloured or lifting
- A cracked acrylic bath
- Rust spots around the plughole
- Chips under the taps
Questions to ask before booking
- Aftercare advice
- Whether the price covers travel
- What protection goes down before work starts
- When it can be used again
Should you replace it?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like is not cheap. A repair keeps it in place. Our bath repair starts from £95. We charge the same wherever you are, so there is no premium for Gomersal. What changes the price is the job itself: the material, the amount of damage and how many items.
Why us?
- Honest advice, even when it means no job
- We come to you, anywhere in the UK
- Fixed prices from your pictures
- We leave the room as we found it
Take a look at our prices page and guide to resurfacing and replacement costs.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
For landlords and businesses
We’re used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Towns and villages near Gomersal
Other services in Gomersal
Different materials, different repairs
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
