Norfolk · England

Bath Repair in Gorleston-on-Sea

Fixed-price bath repair in Gorleston-on-Sea and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • Chips under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Gorleston-on-Sea

How we handle bath repair in Gorleston-on-Sea

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. We regularly repair cast iron enamel, pressed steel enamel and whirlpool & spa baths, and the jobs we see most are holes from dropped items and deep scratches in acrylic.

Every job is backed for twelve months. We return to put right any problem with the work.

Location
Gorleston-on-Sea (NR31)
Area hub
Norfolk
Cover
12 months on all our work
Quotes
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

How to look after the repair

It’s all simple stuff:

  • If an acrylic bath flexes, have its feet adjusted
  • Protect the bath with a towel when doing jobs nearby
  • Rinse the bath after use, especially in hard water areas
  • Do not leave a fresh chip for long

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.

Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.

How it works

We work cleanly and quietly. Protection goes down first, then the work takes a morning or an afternoon. Before we leave, we explain how soon it can be used and how to care for it.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the next day.

Before we arrive

  • Have a window or extractor fan available
  • Tell us about parking, stairs or access
  • Move bottles, mats and clutter away from the area

Ask for a price

For a price in Gorleston-on-Sea, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Send pictures for a quote

Read more

Your questions about bath repair in Gorleston-on-Sea

Do you do work for letting agents?

Yes, often. We can quote for several properties together and work between tenancies.

Is the work guaranteed?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

Is it worth repairing rather than replacing?

Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.

Do you cover the whole of Norfolk?

The whole UK, including all of Norfolk. Send your postcode with your pictures and we’ll offer you dates.

What about rust by the waste?

Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.

How quickly can you book me in?

It depends on the time of year and where you are. We will offer you dates when we send your quote.

Do you come to Gorleston-on-Sea?

Yes, we do. Technicians travel to Gorleston-on-Sea from across the region, and the price is the same as everywhere else.

When to call us in Gorleston-on-Sea

A cracked acrylic bath generally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex until the acrylic gives way.

People generally call us when they notice something like this:

  • A chipped rim or side
  • A chip where the taps sit
  • Rust by the waste and overflow
  • Snagging damage from a refit

Comparing quotes

  • How long it needs to cure
  • What protection goes down before work starts
  • Whether there are any call-out or travel charges
  • Who will actually do the work

10 questions to ask before you book

Work for landlords and builders

We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.

For anyone letting property in or around Gorleston-on-Sea, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.

About Gorleston-on-Sea

Gorleston-on-Sea is about 2 miles south of Great Yarmouth, in Norfolk. Anywhere in NR31, we come to you. Gorleston-on-Sea is one of 797 places in Norfolk we cover.

Here we cover the NR31 postcode area. Jobs here include addresses on Church Road, High Street and Elm Avenue and the roads around them. You’ll find Gorleston-on-Sea on the A47 and A143, so it’s easy for us to reach. We also travel to Bradwell (1 mile west), Hopton on Sea (2 miles south), Bloodman's Corner (3 miles south), Blundeston (4 miles south) and Corton (4 miles south). Larger places within reach include Caister-on-Sea (5 miles north), Brundall (13 miles west), Martham (10 miles north-west), Hemsby (9 miles north), Loddon (11 miles west) and Blofield (12 miles west). Gorleston-on-Sea is among the bigger towns we cover in Norfolk.

Landmarks near Gorleston-on-Sea

Locally, our jobs take us to homes close to East Norfolk Sixth Form College, Church of Jesus Christ of Latter-Day Saints and Peterhouse CofE Primary Academy and the streets around them. The nearest railway station is Great Yarmouth station, about 2.7 miles north. Other landmarks nearby include Tolhouse Gaol (2.2 miles north) and James Paget Hospital (0.8 miles south). The countryside around Gorleston-on-Sea includes Fritton Lake and Lound Lakes.

Map of Gorleston-on-Sea © OpenStreetMap contributors

When we would advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • Cracks in parts of an acrylic bath we can’t get to from below
  • Water coming from the waste or taps rather than the bath
  • A whole bath that is dull or worn, where a full re-enamel is the better fix

If in doubt, send pictures and we’ll say what we think before you book.

Materials we repair

  • Cast iron enamel
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Acrylic
  • Roll-top & freestanding

What your bath is made of matters

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.

Prices and what affects them

Prices start from £95. We do not charge extra for travel to Gorleston-on-Sea. The price comes down to:

  • What kind of damage it is
  • The colour and finish to match
  • The material and finish
  • Any earlier repairs that need removing first

Our prices are the same across the UK, so there’s no premium for Gorleston-on-Sea. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Send photos for a quote

Good photos mean an accurate price. Here’s what we find most useful:

  • Where you are, by postcode
  • A clear, close picture of the problem area
  • Good light, ideally daylight, without flash glare
  • Details of any past repairs

To get a price, send a couple of photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.

Repair or replace in Gorleston-on-Sea?

When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.

Why book with us

  • Colours mixed by hand to suit your surface
  • We leave the room as we found it
  • Straight answers about what a repair can do
  • CHAS and Constructionline accredited

See our full price list or guide to resurfacing and replacement costs.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.