Rhondda Cynon Taff · Wales
Bath chip & crack repair in Graig, Rhondda Cynon Taff
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Graig, with a one-year guarantee on every repair.
- Repairs from £95
- Chips caused by builders
- Deep scratches in acrylic
Bath repair in Graig without replacing anything
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. You can generally use the bath the following day. Common call-outs are for hairline or through cracks in acrylic and chips on the rim or sides, across acrylic, pressed steel enamel and whirlpool & spa baths.
Every repair is covered by a one-year guarantee, wherever you are in Rhondda Cynon Taff.
- Where
- Graig (CF37)
- Region
- Rhondda Cynon Taff
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Graig
Can rust on a bath be repaired?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
Do you cover Graig?
Yes, we do. We send a technician to Graig for every job, with no extra charge for travel.
Do you cover the entire of Rhondda Cynon Taff?
Everywhere in the UK, Graig included. Travel is included in the price.
Are there extra charges for Graig?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Can you repair a hole in a bath?
Often, if there is access underneath. We back the hole, fill it and refinish the surface.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is a cracked acrylic bath repairable?
Often, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Landlord and trade work in Graig
We work for landlords, letting agents and housing providers in Graig as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
For anyone letting property in or around Graig, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
Places near Graig
More services for Graig
Aftercare tips
After the repair has cured, a few habits help it last:
- Put a towel in the bath if you are working above it
- Fix dripping taps early to stop staining and limescale
- Store metal items away from the bath
- Ensure an acrylic bath is firm underfoot
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
Where we work around Graig
Graig is about 1 mile west of Pontypridd, in Rhondda Cynon Taff. Whether you are in the middle of Graig or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Graig is one of 133 places in Rhondda Cynon Taff where we work.
Postcode districts we cover here: CF37. Jobs here include addresses on Fish Lane, Barry Road and Sardis Road. Being close to the A4058 and A4223, Graig is simple for us to get to. Neighbouring places we cover include Pontypridd (1 mile east), Pen-y-coedcae (1 mile south), Pontypridd Town (1 mile east), Glyntaff (1 mile east) and Treforest (1 mile south-east). Larger places within reach include Aberdare (9 miles north-west), Mountain Ash (6 miles north), Tonypandy (5 miles west), Rhondda (7 miles north-west), Porth (3 miles west) and Mountain Ash East (6 miles north).
Local landmarks in Graig
In Graig, that means homes near Maes-Y-Coed Primary School, Ynysangharad Park and St Catherine's Church. Also close by are Pontypridd High School (2 miles north-east) and The Rose & Crown pub (under half a mile south-east). Graig has its own railway station: Pontypridd station. A little further out are Llantrisant Castle (4.2 miles south) and Dewi Sant Hospital (under half a mile south-east). For a walk, there is Coed Craig-yr-hesg.
What affects the price in Graig
Repairs from £95. We price every job individually, from your pictures. The main factors are:
- How many items we do on one visit
- Unusual colours or finishes
- The type of damage
- How easy the damage is to reach
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Quotes from your photos
It only takes a minute to photograph the damage. Please include:
- Something in shot to show the size
- Whether it’s been repaired or coated before
- Natural light rather than flash
- What it’s made of, if you know
To get a price, send a couple of pictures through our quote form or call us. We will say immediately if a repair is the right fix.
Repair or replace: which is better?
Replacing a fitted bath normally involves a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. A repair deals only with the damage in one visit. Our bath repair starts from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- One price list for the whole UK
- One-year guarantee on every repair
- Free fixed quotes from pictures
- We leave the room as we found it
Read our full price list or guide to resurfacing and replacement costs.
Different materials, different repairs
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
What we’re called out for in Graig
Rust typically starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Clients normally contact us about:
- Scuffs and scratches in the surface
- A chip where the taps sit
- A hole punched through by something heavy
- A failed DIY repair that is discoloured or lifting
Comparing quotes
- How the colour is matched
- How soon you can use it again
- What the guarantee covers, and for how long
- Whether there are any call-out or travel charges
How the visit works
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes two to three hours for most chips, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the day after.
How to prepare
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
- Keep a parking space free if you can
How to get a price
Email us photos of the damage and a wider shot of the whole item, and tell us you’re in Graig, and we’ll come back with a fixed quote.
Related advice
Honest limits
A repair isn’t always the answer, and we will tell you before we start. Repairs will not solve:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Water coming from the waste or taps rather than the bath
- Metal that has corroded all the way through
Send us photos and we’ll tell you honestly.
Materials we repair
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
