Lincolnshire · England
Bath Repair for Grainsby homes
Problem with your bath in Grainsby? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Scratches you can feel with a fingernail
- Snagging damage from a refit
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Give the bath a quick rinse after use
- Avoid scourers, wire wool and gritty cream cleaners
- If an acrylic bath flexes, have its feet adjusted
- Clean with warm water and a mild detergent
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Remove it before the repair.
Bath repair in Grainsby, done in place
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There is no plumbing to disconnect, the tiles aren’t touched, and the finish is matched to the rest of the bath. Typical jobs include a cracked acrylic bath and holes from dropped items, across whirlpool & spa baths, cast iron enamel and pressed steel enamel.
All our work is covered by a one-year guarantee.
- Location
- Grainsby (DN36)
- County
- Lincolnshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What bath repair costs
Repairs from £95. There’s no charge for travel to Grainsby. The price comes down to:
- Any earlier repairs that need removing first
- What the surface is made of
- How easy the damage is to reach
- How much damage there is
Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
You can take the photos on your phone. Make sure they show:
- Something in shot to show the size
- One sharp close-up of the damage
- Your postcode, so we can check dates
- Natural light rather than flash
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and you’re under no obligation.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
When we would advise against a repair
A repair is not always the answer, and we’ll tell you before we start. We can’t fix:
- Cracks in acrylic we can’t reach from underneath
- Metal that has corroded all the way through
- Leaking fittings, which need a plumber
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
Our work in Grainsby
Grainsby is about 6 miles south of Cleethorpes, in Lincolnshire. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Our technicians cover 732 places across Lincolnshire, from the larger towns to small villages. Our jobs stretch from Grainsby to Leeds (about 65 miles away).
We work across DN36. We also cover the places around Grainsby: North Thoresby (1 mile south-east), Tetney (3 miles north-east), Ludborough (3 miles south-east), Fulstow (3 miles south-east) and Utterby (4 miles south-east). Within a short drive, we also cover Louth (8 miles south-east), New Waltham (3 miles north), Humberston (5 miles north-east), Market Rasen (12 miles south-west), Caistor (10 miles west) and North Somercotes (9 miles east).
Around Grainsby
We visit homes around Church of St Nicholas and North Thoresby Primary Academy and the streets around them. Nearby you will also find Diana (4.9 miles north).
Common questions in Grainsby
What areas do you cover?
The whole UK, including all of Lincolnshire. Just include your postcode and we will confirm dates.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
What happens if you find more damage?
Your quote covers the damage in the photos. If there’s more, we will tell you before starting.
When can I have a bath again?
Normally by the following day, though it depends on what we have done.
Can you quote from photos?
Usually, yes. Clear photos let us give you a fixed price without visiting.
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
What about rust by the waste?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours. We tidy up before we leave and let you know when you can use it again.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Point us to the nearest place to park
- Let us know about parking or access
- Mention if the room is upstairs or in a flat
How to get a price
If you’re in Grainsby and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
When to call us in Grainsby
Glass and heavy bottles cause more chips than anything else. Fittings cause damage too: water collects there, so chips nearby rust quickly.
You may need us if you’ve spotted any of these:
- Chips under the taps
- Snagging damage from a refit
- Cracks in an acrylic bath
- Impact holes in acrylic
What your quote should include
- Aftercare advice
- Who will actually do the work
- A fixed quote, and whether VAT is included
- What happens if the damage is worse than the photos show
Places near Grainsby
Also in Grainsby
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We work for landlords, letting agents and housing providers in Grainsby as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
About our accreditations · Every repair comes with a one-year guarantee.
