Vale of Glamorgan · Wales
Bath chip & crack repair in Great Brynhill, Vale of Glamorgan
We travel to Great Brynhill for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- A kit repair that didn’t last
- Damage done while the bathroom was being fitted
Great Brynhill and nearby
Great Brynhill is about 1 mile north-west of Gibbonsdown, in the Vale of Glamorgan. We visit homes and businesses in Great Brynhill and nearby villages, so you don’t need to take anything anywhere. Great Brynhill is one of 67 places in the Vale of Glamorgan where we work.
All of CF62 and CF5 is covered, from the main roads to the quietest streets. You will find streets such as Port Road East and Melville Close, and we cover them all. We also cover the places around Great Brynhill: Colcot (1 mile south), Merthyr Dyfan (1 mile south-east), Highlight Park (1 mile south-west), Pencoedtre (1 mile east) and Gibbonsdown (1 mile south-east). Further out, we also cover Penarth (4 miles east), Dinas Powys (3 miles east), Llantwit Major (9 miles west), Cowbridge (8 miles west), Llandough (4 miles east) and Lower Penarth (4 miles east).
Near you in Great Brynhill
Around Great Brynhill, we work in homes near Merthyr Dyfan Church, Colcot Arms and Bryn Hafren Comprehensive School and the streets around them. Also close by are Ysgol Gyfun Bro Morgannwg (1 mile south) and Colcot Primary School (0.5 miles south-east). For rail, the closest station is Cadoxton station, about 1.8 miles south-east. Nearby you’ll also find Barry Hospital (1.2 miles south) and Wenvoe Castle (0.8 miles north-east). Not far away are Park Wood Hill and The Knap Lake.
How we handle bath repair in Great Brynhill
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. If you are dealing with a chip where the taps sit and chips along the edge of the bath, we can help, on acrylic, cast iron enamel and whirlpool & spa baths alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- Great Brynhill (CF62, CF5)
- Area hub
- Vale of Glamorgan
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- Nothing taken out or refitted
- Every repair guaranteed for a year
- Colour mixed on the day to match
- One visit for most repairs
Take a look at our prices page or guide to resurfacing and replacement costs.
The process
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and the work begins. You can expect it to take a few hours, and we’ll keep you posted as we go.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, typically by the next day, the bath is ready to use.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Let the surface dry out before the visit
- Open a window if you can
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Advice
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Check that an acrylic bath doesn’t move when you stand in it
- Put a towel in the bath if you’re working above it
- Fix dripping taps early to stop staining and limescale
- Keep metal cans and razors off the surface
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine without abrasive products.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Do you need bath repair in Great Brynhill?
Rust typically starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
The most common problems we’re called about are:
- Scuffs and scratches in the surface
- Chips under the taps
- Damage done while the bathroom was being fitted
- A chipped rim or side
Before you book anyone
- Who turns up on the day
- What preparation is included
- How your room will be protected
- A fixed quote, and whether VAT is included
Nearby places to Great Brynhill
More services for Great Brynhill
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Cracks in parts of an acrylic bath we can’t get to from below
- Water coming from the waste or taps rather than the bath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Great Brynhill
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
FAQs for Great Brynhill
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across the Vale of Glamorgan.
How do I get a price for bath repair in Great Brynhill?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Do you cover Great Brynhill?
Yes. We work across the UK and come to Great Brynhill and the rest of the Vale of Glamorgan. Send us pictures for a fixed quote, or call 0345 017 0787.
What areas do you cover?
Everywhere in the UK, Great Brynhill included. There is no extra charge for travel.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including older coloured suites.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you price it without visiting?
Nearly always. If photos do not show enough, we’ll ask for another angle.
How we price bath repair
Prices start from £95. Prices are worked out job by job, from your photos. What matters most is:
- How easy the damage is to reach
- How many areas need work
- What the surface is made of
- What kind of damage it is
We charge the same wherever you are, with no extra for Great Brynhill. The job itself decides the price: the material, the amount of damage and how many items.
Send pictures for a quote
We price nearly every job from pictures. This is what we need:
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- One sharp close-up of the damage
- Where you are, by postcode
If you are in Great Brynhill and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
