Norfolk · England
Bath chip & crack repair in Great Cressingham, Norfolk
Bath repair for Great Cressingham, without a refit. Get a fixed quote from your pictures, then we come to you.
- Repairs from £95
- Cracks in an acrylic bath
- A failed DIY repair that is discoloured or lifting
Landlord and trade work in Great Cressingham
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will handle the rest.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Bath repair in Great Cressingham, done in place
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. Our technicians work on whirlpool & spa baths, cast iron enamel and roll-top & freestanding, and common reasons people contact us are scratches you can feel with a fingernail and impact holes in acrylic.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Where
- Great Cressingham (IP25)
- Region
- Norfolk
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Our work in Great Cressingham
Great Cressingham is about 11 miles south-west of Dereham, in Norfolk. Jobs in Great Cressingham are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Our repair technicians cover all 797 towns and villages across Norfolk.
Our visits in IP25 work the same way as everywhere else we cover. We regularly work on streets such as The Street, St Michael's Crescent and The Buttlands and the roads around them. We also cover the places around Great Cressingham: Little Cressingham (2 miles south-east), South Pickenham (2 miles north), Hilborough (2 miles south-west), Ashill (3 miles north-east) and Saham Toney (3 miles east). We also work in nearby towns such as Thetford (11 miles south), Dereham (11 miles north-east), Attleborough (12 miles east), Downham Market (15 miles west), Watton (4 miles east) and Swaffham (5 miles north).
Around Great Cressingham
Our clients here include homes close to Church of St Michael and the streets around them. Well-known places in the area include Desert Rats Museum (2.4 miles south-west). Open spaces near Great Cressingham include Saham Mere.
Do you need bath repair in Great Cressingham?
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.
Keep an eye out for any of the following:
- Damage beneath the taps
- Scratches you can feel with a fingernail
- Chips along the edge of the bath
- Rusty patches near the plughole
What your quote should include
- Is the price fixed, and does it include VAT?
- What happens if they find more damage
- How your room will be protected
- Whether the price covers travel
Repair or replace: which is better?
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. Repairing it fixes just the damaged area in a single visit. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Every repair guaranteed for a year
- One visit for most repairs
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
Read our full price list and resurfacing vs replacement cost guide.
Towns and villages near Great Cressingham
More services for Great Cressingham
Honest limits
We’d rather lose a job than do one that will not last, so these are the limits:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Acrylic cracks with no access behind them
- Leaking fittings, which need a plumber
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
How it works
There’s not much you need to do on the day. Let us in and show us the room, and we will get on with it. The job generally runs to a few hours, tidy-up included.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Clear the area around the damage
- Point us to the nearest place to park
- Tell us about parking, stairs or access
Ask for a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and you’re under no obligation.
Advice
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Do not leave razors or cans standing in the bath
- Get any new chip repaired before it rusts
- A dripping tap stains enamel, so fix it early
- Stick to mild cleaners and a soft cloth
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Questions from Great Cressingham
How do I get a price for bath repair in Great Cressingham?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
What information do you need?
Just pictures, your postcode and a contact number. On the day, access to the room.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you’ll get one combined price.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Do you cover Great Cressingham?
We do. We send a technician to Great Cressingham for every job, and the price is the same as everywhere else.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
About our accreditations · Every repair comes with a one-year guarantee.
