Hartlepool · England
Bath chip & crack repair in Greatham, Hartlepool
Our repair technicians come to Greatham for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Damage beneath the taps
Common questions in Greatham
How long does the repair take to cure?
Normally within a day, depending on the repair.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including pastel and older colours.
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Mention it when you send pictures.
Do you cover Greatham?
Yes. We work across the UK and travel to Greatham. Send pictures and we will quote, or call 0345 017 0787.
About our bath repair in Greatham
Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, the tiles are not touched, and the finish is matched to the rest of the bath. Whether it’s holes from dropped items and chips on the rim or sides, we can help.
You get a one-year guarantee, the same in Greatham as everywhere else we work.
- Location
- Greatham (TS25)
- County
- Hartlepool
- Warranty
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we’re called out for in Greatham
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
If you can see any of these, send us a picture:
- Impact holes in acrylic
- Chips caused by builders
- Deep scratches in acrylic
- Chips along the edge of the bath
Comparing quotes
- What preparation is included
- What happens if the damage is worse than the photos show
- What protection goes down before work starts
- How long the guarantee is and what it covers
Other services in Greatham
Repairs by material
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
How the visit works
Arrival times are agreed in advance, so you’re not left guessing. Once we are there, the work takes a few hours, depending on the damage for most jobs. The room is left tidy.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Have a window or extractor fan available
- Avoid using the area for a few hours before we arrive
- Tell us about parking, stairs or access
Getting a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Greatham and the surrounding area
Greatham is about 3 miles north-east of Billingham, in Hartlepool. Whether you are in the middle of Greatham or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our technicians cover 10 places across Hartlepool, from the larger towns to small villages. You can also see our page for Newcastle upon Tyne, about 29 miles away.
Our visits in TS25 are booked in the same way as anywhere else. Streets in the area include Station Road, High Street and Egerton Terrace, and we cover them all. Neighbouring places we cover include Owton Manor (1 mile north), Rift House (2 miles north), Newton Bewley (2 miles west), Cowpen Bewley (2 miles south-west) and Stranton (3 miles north). Within a short drive, we also cover Hartlepool (3 miles north), Throston (5 miles north) and High Throston (3 miles north).
Around Greatham
In Greatham, that means homes near Manor College of Technology, Church of St John the Baptist and Greatham CofE Primary School, among other places. For rail, the closest station is Seaton Carew station, roughly 1.9 miles north-east. Well-known places in the area include Middleton Grange Shopping Centre (3.1 miles north) and Seaton (1.7 miles north-east). Open spaces near Greatham include Seaton Snook and RSPB Salthome.
Looking after it afterwards
So the finish stays in good condition for years:
- Fix dripping taps early to stop staining and limescale
- Use a soft cloth and washing-up liquid for everyday cleaning
- Don’t scrub with anything abrasive
- Store metal items away from the bath
There’s nothing special to do after a repair, just sensible cleaning. Avoid bleach-based and gritty cleaners.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Work for landlords and builders
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
Housing associations and facilities teams use us for planned and reactive repairs in Hartlepool and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Acrylic cracks with no access behind them
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us photos and we will tell you honestly.
Surfaces we repair
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. A repair keeps it in place. Repairs from £95, with every job priced individually. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Greatham
- Colours mixed by hand to suit your surface
- Usually one visit, start to finish
- CHAS, Constructionline and SafeContractor accredited
- Technicians who travel to you, UK-wide
Take a look at our full price list or resurfacing vs replacement cost guide.
What affects the price in Greatham
Prices start from £95. Every quote is fixed and free. What we take into account:
- How easy the damage is to reach
- The material
- The colour and finish to match
- The type of damage
The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Quotes from your photos
When you take your pictures, these tips help us give you a firm price:
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- A picture taken from further back
- Good light, ideally daylight, without flash glare
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
About our accreditations · Every repair comes with a one-year guarantee.
