Hampshire · England

Bath chip & crack repair in Greywell, Hampshire

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Greywell, with a one-year guarantee on every repair.

  • Repairs from £95
  • Holes from dropped items
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Greywell

Landlords, agents and businesses in Greywell

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.

We work for landlords, letting agents and housing providers in Greywell as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Bath repair in Greywell, done in place

It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. We work on whirlpool & spa baths, cast iron enamel and pressed steel enamel, and the jobs we see most are chips under the taps and a chipped rim or side.

A one-year guarantee comes as standard, so you are covered after the visit.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Where
Greywell (RG29)
County
Hampshire
Warranty
A year, on every repair
Quote
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026

What we can’t put right

We will not take on work that will not last, so here’s what a repair can’t put right:

  • A bath that moves underfoot, until its support is fixed
  • Cracks in acrylic we cannot reach from underneath
  • A bath worn all over, where resurfacing makes more sense

Send us photos and we will tell you honestly.

Materials we repair

  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel
  • Pressed steel enamel
  • Roll-top & freestanding

How the visit works

We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. You can expect it to take a few hours, and we’ll tell you if anything changes.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, generally the day after.

Before we arrive

  • Let us know which floor the room is on
  • Avoid using the area for a few hours before we arrive
  • Have a window or extractor fan available

Get a quote

Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.

Send pictures for a quote

Advice

What your bath is made of matters

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.

Keeping it looking good

Looking after the surface is easy, and it makes a real difference:

  • Clean with warm water and a mild detergent
  • Do not scrub with anything abrasive
  • Store metal items away from the bath
  • Protect the bath with a towel when doing jobs nearby

A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners.

If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.

Greywell and nearby

Greywell is about 6 miles east of Basingstoke, in Hampshire. Clients in Greywell get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Our technicians cover all 683 towns and villages across Hampshire, from the larger towns to small villages. We work right across the region, from Greywell to London (41 miles away).

Our visits in RG29 work the same way as everywhere else we cover. From The Street, Hook Road and Dorchester Way or a nearby road, we can come to you. Neighbouring places we cover include Warnborough Green (1 mile north-east), North Warnborough (1 mile east), Up Nately (1 mile north-west), Nately Scures (1 mile north-west) and Hook Common (1 mile north). We also work in nearby towns such as Basingstoke (6 miles west), Farnborough (9 miles east), Fleet (6 miles east), Aldershot (9 miles east), Alton (8 miles south) and Yateley (8 miles north-east).

Landmarks near Greywell

In Greywell, that means homes near Church of St Mary the Virgin, Robert May's School and Fox And Goose Public House and the streets around them. Greywell’s nearest station is Hook station, roughly 1.4 miles north of the centre. Other landmarks nearby include West Green House Agricultural Museum (3.4 miles north-east) and Odiham Castle (under half a mile north-east). For a walk, there’s Tundry Hill and The Mill Field.

Map of Greywell © OpenStreetMap contributors

Repair or replace: which is better?

When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.

Why Greywell customers choose us

  • Free fixed quotes from pictures
  • Repair technicians who travel to you, UK-wide
  • We leave the room as we found it
  • One visit for most repairs

Read our pricing or resurfacing vs replacement cost guide.

Questions from Greywell

Will the repair last?

A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.

What areas do you cover?

All of Hampshire, and the rest of the UK. There’s no extra charge for travel.

Can you fix rust around the plughole?

Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.

Do you work for landlords and businesses?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Is there any odour?

Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Is a holed acrylic bath repairable?

Normally. Photos of the hole and the underside help us check.

Do you repair coloured baths?

Yes, coloured baths are no problem. We tint the finish to your bath on site.

Can I fix it myself?

If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Signs you need bath repair in Greywell

Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the bath move.

Most people get in touch when they notice one of these:

  • Hairline or through cracks in acrylic
  • Rust by the waste and overflow
  • Holes from dropped items
  • Scuffs and scratches in the surface

What to look for in a quote

  • What prep work is covered
  • What happens if they find more damage
  • Aftercare advice
  • If travel is included in the price

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.