Shetland Islands · Scotland
Bath Repair for Gulberwick homes
We travel to Gulberwick for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- A cracked acrylic bath
- Snagging damage from a refit
Gulberwick: your questions answered
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can a cracked acrylic bath be fixed?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Which areas do you work in?
The whole UK, including all of the Shetland Islands. Just include your postcode and we will confirm dates.
What about rust by the waste?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Can you quote from photos?
In nearly every case. If photos do not show enough, we will ask for another angle.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
How we handle bath repair in Gulberwick
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands with a one-year guarantee. Whether it’s an old repair that has yellowed or come loose and rust spots around the plughole, we can help.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Gulberwick (ZE2)
- County
- Shetland Islands
- Cover
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Gulberwick
What else we do in Gulberwick
Landlord and trade work in Gulberwick
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
Repairs by material
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Gulberwick and nearby
Gulberwick is in the Shetland Islands. We travel to clients in Gulberwick and the surrounding area, so nothing has to leave your home. Gulberwick is one of 63 places in the Shetland Islands where we work.
Postcode districts we cover here: ZE2. You’ll find streets such as Hillside Brae, Hillside Park and Lower Hillside, all of which we cover. If you are just outside Gulberwick, we cover Sound (2 miles north-east), Scalloway (2 miles west), Lerwick (3 miles north-east), Gremista (3 miles north-east) and Grindiscol (4 miles east). Gulberwick is one of the larger places we cover in the Shetland Islands. Remote and island addresses take a little more planning, so call us to arrange it.
What’s near Gulberwick
Locally, our jobs take us to homes close to Gulberwick Mission Church and the streets around them. A little further out are Scalloway Museum (2.5 miles north-west) and Gilbert Bain Hospital (2.5 miles north-east). For a walk, there is Hill of Berry and Flossy Loch.
When to call us in Gulberwick
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex.
Look out for these signs:
- Damage done while the bathroom was being fitted
- Chips along the edge of the bath
- A chip where the taps sit
- A kit repair that didn’t last
What your quote should include
- Is the price fixed, and does it include VAT?
- What happens if the damage is worse than the photos show
- How to care for the finish
- What protection goes down before work starts
What we cannot put right
It helps to know what we cannot do too:
- Acrylic cracks with no access behind them
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
How to look after the repair
So the finish stays in good condition:
- Check that an acrylic bath does not move when you stand in it
- Rinse the bath after use, especially in hard water areas
- Don’t leave razors or cans standing in the bath
- Do not scrub with anything abrasive
Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
How it works
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes two to three hours for most chips in most cases. We leave the room clean and ready to use once it has cured.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the next day.
How to prepare
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
- Tell us about any previous repairs or coatings
Getting a price
Most clients in Gulberwick get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
Repairing versus replacing in Gulberwick
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why choose Surface Doctor in Gulberwick
- One visit for most repairs
- Dust sheets down, tidy finish
- Work done at your home or business
- One price list for the whole UK
Read our pricing and bath cost comparison.
What bath repair costs
Repairs from £95. We do not charge extra for travel to Gulberwick. The price comes down to:
- What the surface is made of
- Access to the area
- Whether we combine several jobs
- The type of damage
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Getting a price from photos
Photographing the damage takes a minute. Please include:
- A coin beside the damage so we can judge size
- One picture of the entire bath
- One sharp close-up of the damage
- Your postcode, so we can check dates
To get a price, send two or three pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.
About our accreditations · Every repair comes with a one-year guarantee.
