Shetland Islands · Scotland
Bath chip & crack repair in Sound, Shetland Islands
Local bath repair for Sound: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Damage beneath the taps
- Chips caused by builders
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Bath repair in Sound without replacing anything
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, generally in a single visit. If you’re dealing with chips on the rim or sides and scuffs and scratches in the surface, we can help, on whirlpool & spa baths, roll-top & freestanding and cast iron enamel alike.
In and around Sound, homes are a mix of older cottages and newer houses. Some still have cast iron or steel baths, which are worth keeping.
All our work comes with our one-year guarantee.
- Area
- Sound (ZE1)
- County
- Shetland Islands
- Guarantee
- A year, on every repair
- Quotes
- From £95. Fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Baths in Sound homes
Sound is about 1 mile south-west of Lerwick, in the Shetland Islands. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. We work in 63 places in the Shetland Islands, from the larger towns to small villages.
We cover every part of the ZE1 postcode area for bath repair and the streets around it. Bath repair is available to homes on Quoys Road, South Road and Oversund Road. Close by, we cover Lerwick (1 mile north-east), Gulberwick (2 miles south-west), Gremista (2 miles north), Grindiscol (2 miles east) and Heogan (2 miles north-east). As one of the bigger places in the Shetland Islands, Sound has every kind of home, from flats to family houses. Some remote addresses need extra planning, so it’s best to call first.
Local landmarks in Sound
We visit homes around Gilbertson Park. Other landmarks nearby include Gilbert Bain Hospital (0.7 miles north-east) and Shetland Museum (1.2 miles north-east). For a walk, there’s Hill of Berry and Clickimin Loch.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
FAQs for Sound
Is it worth repairing old baths in a period home in Sound?
In most cases: original pieces are often better made and harder to replace. Send pictures and we’ll advise.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you cover the whole of the Shetland Islands?
Everywhere in the UK, Sound included. There is no extra charge for travel.
Is a bath repair permanent?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
What does bath repair cost?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
When can I have a bath again?
Normally the following day. We will tell you the exact curing time when we finish.
Do you cover Sound?
Yes. We work across the UK and travel to Sound. Send photos and we will quote, or call 0345 017 0787.
Common problems we fix in Sound
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Send us a photo if you notice any of these:
- Scratches you can feel with a fingernail
- Chips on the rim or sides
- Chips caused by builders
- A hole punched through by something heavy
For older houses around Sound, near landmarks such as St Ringan's United Free Church, it may still have its original cast iron bath, which is well worth repairing or re-enamelling rather than replacing.
Questions to ask before you book
- When it can be used again
- What the guarantee covers, and for how long
- Whether the price covers travel
- Aftercare advice
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Avoid scourers, wire wool and gritty cream cleaners
- Store metal items away from the bath
- Cover the bath during DIY or decorating
- Get any new chip repaired before it rusts
There is nothing special to do after a repair. Avoid bleach-based and gritty cleaners and rinse after use.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
Why repair rather than replace?
Replacing a fitted bath usually means a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. Repairing it deals only with the damage in one visit. For a home around Sound where the bath is sound, replacing it is rarely worth the cost and disruption.
Prices start from £95. The price reflects the work involved, not your postcode. You’ll see the full price before booking, with no extras added later.
What you get with us
- Colour-matched on site
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
- We will tell you if it’s not worth repairing
Read our Pricing Or Resurfacing vs replacement cost guide.
Landlords, agents and businesses in Sound
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
Also near Sound
Also in Sound
When we’d advise against a repair
Before you book, it’s worth knowing the limits too:
- A steel bath rusted through
- A bath that moves underfoot, until its support is fixed
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Send us pictures and we will tell you honestly before you book.
Surfaces we repair
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
How the visit works
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes a few hours. The room is left tidy and ready to use once it has cured. In a smaller place like Sound, parking is rarely a problem. Mention a lane, gate or long drive when you book and we will plan for it.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Open a window if you can
- Let us know if it has been repaired before
Ask for a price
The quickest way to a price is to send two or three photos using our quote form or ring us. We will say immediately if a repair is the right fix.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
