North Yorkshire · England

Bath chip & crack repair in Gunnerside, North Yorkshire

Problem with your bath in Gunnerside? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Repairs from £95
  • A chip where the taps sit
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Gunnerside homes

How to care for the repair

Most damage we see is avoidable. These habits help:

  • Avoid scourers, wire wool and gritty cream cleaners
  • Fix dripping taps early to stop staining and limescale
  • Cover the bath during DIY or decorating
  • Ensure an acrylic bath is firm underfoot

Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.

Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.

How we handle bath repair in Gunnerside

We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. Whether it’s scuffs and scratches in the surface and rusty patches near the plughole, we can typically put it right.

You are covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.

Before and after: a damaged acrylic bath corner repaired in place
Area
Gunnerside (DL11)
Region
North Yorkshire
Cover
A year, on every repair
Quote
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026

Why repair rather than replace?

Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

Why us?

  • CHAS and Constructionline accredited
  • Colour-matched on site
  • Normally one visit, start to finish
  • A fixed quote before booking

See our full price list or guide to resurfacing and replacement costs.

Common problems we fix in Gunnerside

Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex until the acrylic gives way.

Common reasons people in Gunnerside contact us are:

  • Holes from dropped items
  • Rusty patches near the plughole
  • Deep scratches in acrylic
  • Chips on the rim or sides

Comparing quotes

  • What happens if they find more damage
  • How soon you can use it again
  • The length of the guarantee and what it covers
  • Whether cleaning and preparation are in the price

Choosing a repair company

The process

Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a few hours. If we find something your pictures didn’t show, we will explain it before carrying on.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. We leave it to cure; you can normally use the bath the following day.

Preparing for the visit

  • Clear the area around the damage
  • Keep pets and children out of the room while we work
  • Avoid using the area for a few hours before we arrive

How to get a price

We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.

Get a fixed quote

Advice

Gunnerside: your questions answered

Is a bath repair durable?

It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.

Do you come to Gunnerside?

Yes. We work across the UK and come to Gunnerside and the rest of North Yorkshire. Send us photos for a fixed quote, or call 0345 017 0787.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

What about rust by the waste?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Will the price change on the day?

Your quote covers the damage in the photos. Anything extra is discussed before we begin.

What areas do you cover?

Everywhere in the UK, Gunnerside included. Travel is included in the price.

How do I get a price for bath repair in Gunnerside?

Prices start from £95. We give a fixed quote from your photos. Send a close-up and a photo of the whole item with your DL11 postcode.

For landlords and businesses

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

Builders use us to fix snagging damage before handover. We can visit several plots in one trip.

Materials and what they mean for the repair

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

When a repair isn’t the answer

Some jobs aren’t right for a repair, including:

  • Cracks in parts of an acrylic bath we can’t get to from below
  • Water coming from the waste or taps rather than the bath
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

If in doubt, send photos and we’ll say what we think.

Surfaces we repair

  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths

DIY kit or professional repair?

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Where we work around Gunnerside

Gunnerside is about 15 miles west of Catterick Garrison, in North Yorkshire. Anywhere in DL11, we carry out the work at your property. Gunnerside is one of 626 places in North Yorkshire we cover. We work right across the region, from Gunnerside to Leeds (about 45 miles away).

Postcode districts we cover here: DL11. Main roads around Gunnerside include the B6270, so getting to you is simple. Neighbouring places we cover include Thwaite (4 miles west), Eskeleth (4 miles north-east), Keld (4 miles north-west), Angram (4 miles west) and Healaugh (4 miles east). Larger places within reach include Catterick Garrison (15 miles east), Richmond (14 miles east), Leyburn (11 miles south-east), Hipswell (14 miles east) and Scotton (15 miles east).

Near you in Gunnerside

In Gunnerside, that means homes near Gunnerside Methodist Primary School and Kings Head Inn and the streets around them. For a walk, there is Calver Hill.

Map of Gunnerside © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.