Staffordshire · England

Bath Repair in Hademore

Bath repair across Hademore and nearby, generally in one visit and guaranteed for a year.

  • Repairs from £95
  • Scratches you can feel with a fingernail
  • A chip where the taps sit
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Hademore

Landlord and trade work in Hademore

Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Housing associations and facilities teams use us for planned and reactive repairs in Staffordshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

About our bath repair in Hademore

We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. Whether it’s a failed DIY repair that’s discoloured or lifting and impact holes in acrylic, we can generally put it right, on cast iron enamel, pressed steel enamel and acrylic alike.

A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Location
Hademore (WS14)
County
Staffordshire
Guarantee
12 months on all our work
Price
From £95. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026

Materials and what they mean for the repair

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

Keeping it looking good

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Fix dripping taps early to stop staining and limescale
  • Rinse it down after each bath
  • Clean with warm water and a mild detergent
  • Put a towel in the bath if you are working above it

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.

Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.

Our work in Hademore

Hademore is about 3 miles east of Lichfield, in Staffordshire. From the centre of Hademore to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 512 places across Staffordshire. You can also see our page for Birmingham, about 15 miles away.

Postcode districts we cover here: WS14. We also cover the places around Hademore: Whittington (1 mile north-west), Huddlesford (1 mile north-west), Comberford (2 miles east), Elford (2 miles north-east) and Hopwas (2 miles south). Further out, we also cover Burton upon Trent (10 miles north-east), Tamworth (4 miles south-east), Cannock (11 miles west), Lichfield (3 miles west), Rugeley (10 miles north-west) and Burntwood (8 miles west).

What’s near Hademore

In Hademore, that means homes near Whittington Primary School, Church of St Giles and The Rawlett School. The closest station to Hademore is Lichfield Trent Valley station, about 2.5 miles north-west of the centre. Further afield, we also cover the area around Tamworth Castle (3.4 miles south-east) and Ankerside Shopping Centre (3.4 miles south-east). For a walk, there’s Stowe Pool.

Map of Hademore © OpenStreetMap contributors

Can I fix it myself?

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.

Prices and what affects them

Prices start from £95. We charge the same across the UK, including Hademore. The price reflects:

  • Any earlier repairs that need removing first
  • How hard the colour is to match
  • How easy the damage is to reach
  • How many areas need work

Our prices are the same across the UK, so there is no premium for Hademore. What changes the price is the job itself: how much damage, what it’s made of and how many items.

How to get a fixed price

You can typically get a fixed price without us visiting. To make it quick:

  • One sharp close-up of the damage
  • Daylight if possible, and no flash reflection
  • The material, if you know it
  • A coin beside the damage so we can judge size

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

When a repair is not the answer

We’d rather lose a job than do one that will not last, so these are the limits:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Metal that has corroded all the way through
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

Not sure? Send pictures and we’ll give you a straight answer.

Materials we repair

  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Cast iron enamel
  • Pressed steel enamel
  • Acrylic

Why repair rather than replace?

People often assume a cracked or chipped bath has to come out. In most cases it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why book with us

  • No extra charge for your area
  • CHAS and Constructionline accredited
  • We leave the room as we found it
  • One visit for most repairs

See our pricing and guide to resurfacing and replacement costs.

What happens on the day

We turn up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take a morning or an afternoon, and the room is left clean and tidy.

  1. First, we check the damage against your photos and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

How to prepare

  • Clear toiletries, mats and anything else from around the area
  • Mention any earlier repairs or resurfacing
  • Let the surface dry out before the visit

Get a quote

The quickest way to a price is to send a couple of pictures through our quote form or call us. We will say straight away if a repair is the right fix.

Get a free quote

Read more

Your questions about bath repair in Hademore

Is there a guarantee?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Can you repair something that is been repaired before?

Typically, yes. The old repair comes out first, so let us know about it.

Can you price it without visiting?

Generally, yes. A close-up and a wider photo are enough to give a fixed price.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.

Can you match an avocado or pink bath?

Yes, we match coloured baths too. We tint the finish to your bath on site.

Do you cover the whole of Staffordshire?

We cover the whole UK, including Hademore and the rest of Staffordshire. Just include your postcode and we will offer you dates.

Do you charge for travel?

Travel is included in the price, with the same prices everywhere we work.

Does someone need to be in?

Yes. We need access to the room while we work, at a time that suits you.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.