County Durham · England
Bath chip & crack repair in Hamsterley, County Durham
Damaged bath in Hamsterley? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- A hole punched through by something heavy
- Rust spots around the plughole
Bath repair at your home in Hamsterley
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in a single visit. We regularly repair roll-top & freestanding, cast iron enamel and whirlpool & spa baths, and common reasons people get in touch are a hole punched through by something heavy and damage done while the bathroom was being fitted.
Every repair is covered by our one-year guarantee.
- Area
- Hamsterley (DL13)
- Region
- County Durham
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we can’t put right
To be straight with you, some problems need a different fix:
- A bath worn all over, where resurfacing makes more sense
- Flexing caused by a failed cradle or loose feet
- Cracks in parts of an acrylic bath we cannot get to from below
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
Where we work around Hamsterley
Hamsterley is about 6 miles west of Bishop Auckland, in County Durham. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. We work in all 329 towns and villages across County Durham. We work right across the region, from Hamsterley to Newcastle upon Tyne (23 miles away).
Every address in DL13 is within our area. Local streets include Hamsterley Pastures, Saunders Avenue and Bedburn Road, all of which we cover. If you are just outside Hamsterley, we cover Bedburn (1 mile north-west), Morley (2 miles south), South Side (3 miles south), Lynesack (3 miles south-west) and Butterknowle (3 miles south). Within a short drive, we also cover Durham (12 miles north-east), Consett (12 miles north), Newton Aycliffe (11 miles east), Bishop Auckland (6 miles east), Spennymoor (9 miles east) and Stanley (14 miles north).
Landmarks near Hamsterley
We visit homes around Cross Keys pub, Hamsterley Primary School and Church of St James, among other places. Well-known places in the area include Witton Castle (2.4 miles east) and Bishop Auckland Hospital (5.9 miles east).
What affects the price in Hamsterley
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- The type of damage
- How easy the damage is to reach
- How many areas need work
- How many items we do on one visit
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
How to get a fixed price
Good photos mean an accurate price. Here’s what we find most useful:
- A coin beside the damage so we can judge size
- A wider photo showing the entire bath
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Your questions about bath repair in Hamsterley
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
How invisible is a bath repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How long before I can use the bath?
Most baths can be used the next day. We will tell you the exact curing time when we finish.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Hamsterley.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Do the materials smell?
There may be a mild smell during the work.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Common problems we fix in Hamsterley
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
The things customers generally mention when they call are:
- A failed DIY repair that’s discoloured or lifting
- Deep scratches in acrylic
- A hole punched through by something heavy
- Damage beneath the taps
What to look for in a quote
- Aftercare advice
- The length of the guarantee and what it covers
- What preparation is included
- Whether the price is fixed and includes VAT
Landlord and trade work in Hamsterley
We work for landlords, letting agents and housing providers in Hamsterley as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. The price reflects the work involved, not your postcode. The full price is agreed before booking.
What you get with us
- Dust sheets down, tidy finish
- Generally one visit, start to finish
- A fixed quote before booking
- We will tell you if it’s not worth repairing
See our prices page and guide to resurfacing and replacement costs.
What we do, step by step
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and the work begins. You can expect it to take two to three hours for most chips, and we will tell you if anything changes.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
How to prepare
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
- Clear the area around the damage
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
Advice
Places near Hamsterley
What else we do in Hamsterley
About our accreditations · Every repair comes with a one-year guarantee.
