Kent · England
Bath Repair for Hareplain homes
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Hareplain. Free, fixed quotes from your photos.
- Repairs from £95
- Deep scratches in acrylic
- A chipped rim or side
Bath repair at your home in Hareplain
Most of our bath repairs take a few hours, and the bath is back in use the following day. There’s no need to book a plumber or tiler, because the bath doesn’t move. Typical jobs include chips along the edge of the bath and chips under the taps, across acrylic, roll-top & freestanding and pressed steel enamel.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Hareplain (TN27)
- County
- Kent
- Warranty
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Hareplain: your questions answered
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Will the repair show?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
How much does bath repair cost in Hareplain?
Prices start from £95. We give a fixed price from your pictures. Send a close-up and a photo of the entire item and your postcode.
Can a cracked acrylic bath be fixed?
Typically, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
What information do you need?
Send photos through the quote form or call 0345 017 0787.
Is the work guaranteed?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Honest limits
To be straight with you, some problems need a different fix:
- A bath worn all over, where resurfacing makes more sense
- Flexing caused by a failed cradle or loose feet
- Leaking fittings, which need a plumber
Send us pictures and we will tell you honestly before booking.
Materials we work on in Hareplain
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
More services for Hareplain
Landlord and trade work in Hareplain
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
If you manage property in Hareplain, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
When to call us in Hareplain
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
These are the problems we’re asked about most:
- An old repair that has yellowed or come loose
- A hole punched through by something heavy
- Deep scratches in acrylic
- Cracks in an acrylic bath
Questions to ask before you book
- What the guarantee covers, and for how long
- How changes to the job are handled
- Whether cleaning and preparation are in the price
- Whether the price is fixed and includes VAT
How the visit works
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours, and the room is left clean and tidy.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can normally use the bath the following day.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Keep a parking space free if you can
- Keep children and pets away from the room on the day
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Materials and what they mean for the repair
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Hareplain and the surrounding area
Hareplain is about 10 miles south of Maidstone, in Kent. Our technicians come to clients in Hareplain and the surrounding area, so nothing has to leave your home. We cover all 922 towns and villages across Kent. We work right across the region, from Hareplain to London (about 40 miles away).
We cover every part of the TN27 postcode area. Other places close to Hareplain include Three Chimneys (1 mile south-west), Biddenden (1 mile south-east), Curteis' Corner (1 mile east), Lashenden (2 miles north-east) and Standen (2 miles east). Within a short drive, we also cover Maidstone (10 miles north), Ashford (11 miles east), Royal Tunbridge Wells (15 miles west), Tonbridge (15 miles west), Kings Hill (14 miles north-west) and Foley Park (11 miles north).
Near you in Hareplain
Our customers here include homes close to Three Chimneys Public House. The closest station to Hareplain is Headcorn station, roughly 2.8 miles north. Other landmarks nearby include Kent Firefighting Museum (0.8 miles north) and Sissinghurst Castle (1.7 miles south-west).
Prices and what affects them
Repairs from £95. Prices are worked out job by job, from your photos. The main factors are:
- The material and finish
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
- How hard the colour is to match
We charge the same wherever you are, with no extra for Hareplain. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from pictures
We price nearly every job from pictures. This is what we need:
- Good light, ideally daylight, without flash glare
- One picture of the whole bath
- A close-up of the damage, in focus
- Your postcode, so we can check dates
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Aftercare tips
To keep it looking its best for years:
- Avoid scourers, wire wool and gritty cream cleaners
- Fix dripping taps early to stop staining and limescale
- Give the bath a quick rinse after use
- Stick to mild cleaners and a soft cloth
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
About our accreditations · Every repair comes with a one-year guarantee.
