Kent · England
Bath Repair for Standen homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Standen, with a one-year guarantee on every repair.
- Repairs from £95
- A chip where the taps sit
- Deep scratches in acrylic
Bath repair in Standen without replacing anything
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. We work on whirlpool & spa baths, cast iron enamel and pressed steel enamel, and the jobs we see most are rusty patches near the plughole and a chip where the taps sit.
The work is covered for a year after we finish. If anything is not right, ring us and we will come back.
- Location
- Standen (TN27)
- Region
- Kent
- Guarantee
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Prices start from £95. A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- One-year guarantee on every repair
- Honest advice, even when it means no job
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
Read our pricing and resurfacing vs replacement cost guide.
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Work for landlords and builders
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Do you need bath repair in Standen?
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
Common reasons people in Standen contact us are:
- Chips on the rim or sides
- Cracks in an acrylic bath
- Snagging damage from a refit
- Deep scratches in acrylic
What to look for in a quote
- How your room will be protected
- A fixed price, and whether VAT is included
- What aftercare is recommended
- Whether they match the colour on site
What we can’t put right
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A steel bath rusted through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
Send us photos and we will tell you honestly.
Surfaces we repair
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Protect the bath with a towel when doing jobs nearby
- Clean with warm water and a mild detergent
- If an acrylic bath flexes, have its feet adjusted
- Keep metal cans and razors off the surface
A repaired bath needs no special treatment, just sensible cleaning. Avoid bleach-based and gritty cleaners.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
How we price bath repair
Prices start from £95. There is no charge for travel to Standen. The price depends on:
- How hard the colour is to match
- How easy the damage is to reach
- What kind of damage it is
- Previous DIY repairs that have to come out
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Quotes from your pictures
You can take the pictures on your phone, there’s no need for anything special. Just make sure we can see:
- Something in shot to show the size
- One picture of the whole bath
- Where you are, by postcode
- A clear, close picture of the problem area
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Common questions in Standen
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Standen.
Can a cracked acrylic bath be fixed?
Often, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Are there extra charges for Standen?
There’s no separate call-out charge. Your fixed price includes everything.
How invisible is a bath repair?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
What happens once I’ve sent pictures?
You will get a fixed quote back. There is no obligation to book.
Places near Standen
Also in Standen
Covering Standen
Standen is about 9 miles west of Ashford, in Kent. Whether you’re in the middle of Standen or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover 922 places in Kent, from the larger towns to small villages. Our nearest city page is London, about 41 miles away.
We cover every part of TN27. Whether you live on Smarden Road, Pook Lane and Weeks Lane or anywhere nearby, we can come to you. Nearby, we also work in Curteis' Corner (1 mile south-west), Lashenden (1 mile north-west), Monk's Hill (1 mile north-east), Biddenden (1 mile south-west) and Stede Quarter (1 mile south-east). Larger places within reach include Maidstone (11 miles north-west), Ashford (9 miles east), Sittingbourne (15 miles north), Kings Hill (14 miles north-west), Foley Park (12 miles north-west) and Paddock Wood (12 miles west).
Local landmarks in Standen
The nearest railway station is Headcorn station, roughly 2.6 miles north-west. Further afield, we also cover the area around Benenden Hospital (3.5 miles south-west) and Romden Castle (2.7 miles north-east).
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes two to three hours for most chips. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Let the surface dry out before the visit
- Keep a parking space free if you can
- Let us know if it has been repaired before
Ask for a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and you are under no obligation.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
