Cambridgeshire · England

Bath Repair in Harlton

Bath repair in and around Harlton: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • A chip where the taps sit
  • Scratches you can feel with a fingernail
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Harlton

About our bath repair in Harlton

Most of our bath repairs take a few hours, and you can normally bathe again the day after. You will not need a plumber or tiler, because the bath does not move. Typical jobs include damage beneath the taps and a hole punched through by something heavy, in whirlpool & spa baths, roll-top & freestanding and cast iron enamel.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Before and after: a damaged acrylic bath corner repaired in place
Where
Harlton (CB23)
County
Cambridgeshire
Guarantee
A year, on every repair
Quotes
From £95. Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026

FAQs for Harlton

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

What do you need from me?

Send pictures through the quote form or call 0345 017 0787, and we will take it from there.

Can pets and children be at home?

Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.

Can I get a quote without a visit?

Normally, yes. Clear photos let us give you a fixed price without visiting.

Can you repair something that’s been repaired before?

In most cases. The old repair comes out first.

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.

What about rust by the waste?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Common problems we fix in Harlton

Rust typically starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.

Signs it’s time to call us include:

  • An old repair that has yellowed or come loose
  • Chips on the rim or sides
  • Scuffs and scratches in the surface
  • Rusty patches near the plughole

Comparing quotes

  • When it can be used again
  • Whether the price covers travel
  • Is the price fixed, and does it include VAT?
  • How your room will be protected

Our hiring checklist

How to care for the repair

Good habits make a big difference to how long a repair lasts:

  • Clean with warm water and a mild detergent
  • Make sure an acrylic bath is firm underfoot
  • A dripping tap stains enamel, so fix it early
  • Rinse it down after each bath

There’s nothing special to do after a repair, just sensible cleaning. Skip bleach and gritty creams and give it a rinse after each bath.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.

When we would advise against a repair

Before you book, it’s worth knowing the limits:

  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • Acrylic cracks with no access behind them
  • Water coming from the waste or taps rather than the bath

If in doubt, send photos and we’ll say what we think before booking.

Materials we work on in Harlton

  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Cast iron enamel
  • Pressed steel enamel
  • Acrylic

How the visit works

Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a morning or an afternoon. If we find something your photos didn’t show, we will explain it before carrying on.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the day after.

Before we arrive

  • Tell us about any previous repairs or coatings
  • Clear toiletries, mats and anything else from around the area
  • Have somewhere for us to park nearby if possible

How to get a price

For a price in Harlton, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Send pictures for a quote

Related advice

Harlton and nearby

Harlton is about 6 miles south-west of Cambridge, in Cambridgeshire. Clients in Harlton get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Harlton is one of 371 places in Cambridgeshire where we work. You can also see our page for London, about 45 miles away.

We cover every part of CB23. We regularly work on streets such as High Street, Coach Drive and Snakes Lane. Neighbouring places we cover include Little Eversden (1 mile north-west), Haslingfield (1 mile east), Great Eversden (2 miles north-west), Barrington (2 miles south) and Orwell (2 miles south-west). Within a short drive, we also cover Cambridge (6 miles north-east), St Neots (13 miles west), Huntingdon (15 miles north-west), St Ives (13 miles north), Royston (7 miles south) and Cambourne (6 miles north-west).

Around Harlton

We visit homes around Haslingfield Endowed Primary School, Comberton Village College and Church of St Mary and the streets around them. Harlton’s nearest station is Foxton station, about 2.7 miles south-east of the centre. A little further out are Orwell Toot Hill (1.7 miles south-west) and Royal Papworth Hospital (4.9 miles east). Open spaces near Harlton include L-moor and Rowley's Hill.

Map of Harlton © OpenStreetMap contributors

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams in Cambridgeshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

Different materials, different repairs

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.

Repair or replace: which is better?

A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Prices start from £95. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

What you get with us

  • CHAS and Constructionline accredited
  • Dust sheets down, tidy finish
  • Repair technicians who travel to you, UK-wide
  • No need to remove anything

Read our pricing and guide to resurfacing and replacement costs.

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.