Hampshire · England

Bath Repair in Hartley Wespall

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Hartley Wespall, with a one-year guarantee on every repair.

  • Repairs from £95
  • Snagging damage from a refit
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Hartley Wespall

How we handle bath repair in Hartley Wespall

We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for a chipped rim or side and a failed DIY repair that’s discoloured or lifting, across cast iron enamel, whirlpool & spa baths and pressed steel enamel.

Every job is backed for twelve months in Hartley Wespall and everywhere else. If something goes wrong with the work, we come back.

Area
Hartley Wespall (RG27)
Region
Hampshire
Warranty
One year on every repair
Quote
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

What affects the price in Hartley Wespall

Prices start from £95. We price every job individually. What matters most is:

  • Whether it’s a chip, crack, burn or wear
  • The material and finish
  • Unusual colours or finishes
  • How many items we do on one visit

A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with nothing added on the day.

Send pictures for a quote

Phone photos are fine. Ensure they show:

  • A wider photo showing the entire bath
  • Something in shot to show the size
  • A close-up of the damage, in focus
  • Whether it’s been repaired or coated before

We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Do you need bath repair in Hartley Wespall?

Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.

These are the problems we are asked about most:

  • Cracks in an acrylic bath
  • Deep scratches in acrylic
  • Chips along the edge of the bath
  • A kit repair that didn’t last

What to look for in a quote

  • Whether the price covers travel
  • When it can be used again
  • What the guarantee covers, and for how long
  • Who will actually do the work

Choosing a repair company

For landlords and businesses

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

Housing associations and facilities teams use us for planned and reactive repairs in Hampshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

What we do, step by step

The work is clean and fairly quiet. We protect the area first, then the work takes a few hours, depending on the damage. Before we leave, we explain how soon it can be used and how to care for it.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. The chip or crack is filled, then sanded level with the bath.
  3. The colour is mixed on the spot to match your bath.
  4. We build up the finish and polish it into the surrounding enamel.
  5. We leave it to cure; you can generally use the bath the following day.

Before we arrive

  • Point us to the nearest place to park
  • Mention any earlier repairs or resurfacing
  • Tell us about parking, stairs or access

How to get a price

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.

Send photos for a quote

Related advice

About Hartley Wespall

Hartley Wespall is about 6 miles north-east of Basingstoke, in Hampshire. From the centre of Hartley Wespall to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 683 towns and villages across Hampshire. Our jobs stretch from Hartley Wespall to London (about 41 miles away).

Every address in RG27 is within our area. Streets in the area include Rotherwick Lane and Mill Lane, all of which we cover. We also travel to Spanish Green (1 mile north-west), Sherfield on Loddon (1 mile west), Church End (2 miles south-west), Bramley Green (2 miles west) and Stratfield Saye (3 miles north). Within a short drive, we also cover Basingstoke (6 miles south-west), Farnborough (10 miles east), Fleet (8 miles east), Aldershot (11 miles south-east), Alton (11 miles south) and Yateley (7 miles east).

Near you in Hartley Wespall

In Hartley Wespall, that means homes near The Cricketers Public House, Church of St Mary the Blessed Virgin and Sherfield School and the streets around them. For rail, the closest station is Bramley (Hants) station, about 2.8 miles west. A little further out are West Green House Agricultural Museum (3.1 miles east) and Basingstoke and North Hampshire Hospital (5.3 miles south-west). Open spaces near Hartley Wespall include The Mill Field.

Map of Hartley Wespall © OpenStreetMap contributors

What your bath is made of matters

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.

Common questions in Hartley Wespall

How do I get a price for bath repair in Hartley Wespall?

Repairs from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.

I tried a repair kit. Can you fix it?

Yes. We take out the old repair and do it properly. Tell us about it when you send photos.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Do the materials smell?

Expect a mild smell while we are working.

Can pets and children be at home?

We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.

How soon can you come?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Will the price change on the day?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

What about rust by the waste?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

Why repair rather than replace?

Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

What you get with us

  • A fixed quote before you book
  • Work done at your home or business
  • Honest advice, even when it means no job
  • No need to remove anything

Take a look at our full price list and guide to resurfacing and replacement costs.

Keeping it looking good

Simple care helps the repair last. Our advice:

  • Avoid scourers, wire wool and gritty cream cleaners
  • Store metal items away from the bath
  • Check that an acrylic bath does not move when you stand in it
  • Use a soft cloth and washing-up liquid for everyday cleaning

For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine.

A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.