Bolton · England
Bath chip & crack repair in Harwood, Bolton
Bath repair for Harwood, without a refit. Send us photos for a fixed quote, then we come to you.
- Repairs from £95
- A chip where the taps sit
- Rust by the waste and overflow
Bath repair in Harwood without replacing anything
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We regularly repair pressed steel enamel, roll-top & freestanding and cast iron enamel, and the jobs we see most are chips caused by builders and hairline or through cracks in acrylic.
Big or small, it’s backed by a one-year guarantee in Harwood and across Bolton.
- Area
- Harwood (BL2)
- Region
- Bolton
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and the work begins. You can expect it to take two to three hours for most chips, and we will tell you if anything changes.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the next day.
How to prepare
- Let the surface dry out before the visit
- Make sure the room can be ventilated
- Mention any earlier repairs or resurfacing
How to get a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and no obligation.
Advice
Common questions in Harwood
Can you price it without visiting?
Nearly always. If photos do not show enough, we will ask for another angle.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Are there extra charges for Harwood?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Harwood.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Is there a guarantee?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
How to care for the repair
It’s all simple stuff:
- If an acrylic bath flexes, have its feet adjusted
- Give the bath a quick rinse after use
- Put a towel in the bath if you are working above it
- Stick to mild cleaners and a soft cloth
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
Harwood and nearby
Harwood is about 3 miles east of Bolton, in Bolton. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Harwood is one of 61 places in Bolton we cover. We work right across the region, from Harwood to Manchester (about 11 miles away).
Jobs in BL2 work the same way as everywhere else we cover. From Ruins Lane, Links Road and Arthur Lane or a nearby road, a technician can come to you. We also travel to Bottom o' the Moor (1 mile south-east), Ainsworth (1 mile south-east), Breightmet (1 mile south), Bradley Fold (2 miles south) and Bolholt (2 miles east). Larger places within reach include Bolton (3 miles west), Horwich (7 miles west), Halliwell (3 miles west), Farnworth (3 miles south), Westhoughton (7 miles south-west) and Daubhill (4 miles south-west).
Near you in Harwood
Locally, our jobs take us to homes close to Duke William Inn, Harwood Meadows Primary School and Seven Acres Country Park, among other places. You’ll also find Christ's Church (within half a mile south-west) and Bolton St Catherine's Academy (0.5 miles west). The nearest railway station is Hall i' th' Wood station, roughly 1.5 miles west. Nearby you will also find Bolton Market Place (2.4 miles south-west) and Tonge Moor Textile Machinery Museum (1.4 miles west). Open spaces near Harwood include Nob End.
- Parks and local facilities nearby include Tonge with Haulgh (1.1 miles west)
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Places near Harwood
Also in Harwood
Prices and what affects them
Prices start from £95. Every quote is fixed and free. What we take into account:
- The material
- The size and number of damaged areas
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
Compared with replacing, repairing generally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what to send:
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- One picture of the entire bath
- Any earlier repairs or coatings
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Honest limits
Some jobs are not right for a repair, including:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Flexing caused by a failed cradle or loose feet
- A bath worn all over, where resurfacing makes more sense
Send us photos and we will tell you honestly before booking.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Should you replace it?
People often assume a cracked or chipped bath has to come out. Usually it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. We charge the same wherever you are, with no extra for Harwood. The job itself decides the price: the material, the amount of damage and how many items.
Why choose Surface Doctor in Harwood
- Typically one visit, start to finish
- Colour mixed on the day to match
- We leave the room as we found it
- No need to remove anything
Read our prices page and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
