County Durham · England

Bath chip & crack repair in Haswell Moor, County Durham

Chip and crack repairs to enamel, acrylic and cast iron baths in Haswell Moor, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • A chip where the taps sit
  • An old repair that has yellowed or come loose
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Haswell Moor

Repair or replace: which is better?

Replacing a bath rarely stops at the bath: tiles along the rim typically crack when it comes out, a new panel is often needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why book with us

  • Every repair guaranteed for a year
  • We leave the room as we found it
  • Straight answers about what a repair can do
  • No extra charge for your area

Read our prices page and guide to resurfacing and replacement costs.

Bath repair in Haswell Moor, done in place

Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for rust by the waste and overflow and chips under the taps, in roll-top & freestanding, whirlpool & spa baths and cast iron enamel.

Whatever the size of the job, it’s backed by a one-year guarantee.

Rusty chip next to a bath plughole, before and after repair
Where
Haswell Moor (DH6)
Area hub
County Durham
Cover
12 months on all our work
Price
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026

What we can’t put right

We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Acrylic cracks with no access behind them
  • Flexing caused by a failed cradle or loose feet

Send us pictures and we’ll tell you honestly before you book.

Surfaces we repair

  • Pressed steel enamel
  • Whirlpool & spa baths
  • Cast iron enamel
  • Roll-top & freestanding
  • Acrylic

How it works

On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a few hours, depending on the damage. We tidy up before we leave and tell you when it’s ready to use.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We apply the finish coats and polish the repair so it blends in.
  5. The repair is left to cure, and most baths can be used the day after.

Before we arrive

  • Avoid using the area for a few hours before we arrive
  • Mention any earlier repairs or resurfacing
  • Move bottles, mats and clutter away from the area

How to get a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.

Get a free quote

Advice

Can I fix it myself?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

Haswell Moor: your questions answered

How do I get a price for bath repair in Haswell Moor?

Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.

Can I get a quote without a visit?

Yes, almost always. Clear pictures let us give you a fixed price without visiting.

What happens once I’ve sent photos?

We review the photos and send a fixed quote with dates.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Are there extra charges for Haswell Moor?

No. Our quotes include travel, with the same prices everywhere we work.

Can landlords book you?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across County Durham.

How quickly can you book me in?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

Common problems we fix in Haswell Moor

Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the base flex until it cracks.

If you can see any of these, send us a picture:

  • A failed DIY repair that’s discoloured or lifting
  • Scratches you can feel with a fingernail
  • Hairline or through cracks in acrylic
  • Holes from dropped items

Questions to ask before you book

  • A fixed quote, and whether VAT is included
  • When it can be used again
  • What the guarantee covers, and for how long
  • What happens if the damage is worse than the photos show

Choosing a repair company

Landlords, agents and businesses in Haswell Moor

For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Aftercare tips

Simple care helps the repair last. We recommend:

  • Store metal items away from the bath
  • Stick to mild cleaners and a soft cloth
  • If an acrylic bath flexes, have its feet adjusted
  • Cover the bath during DIY or decorating

Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.

Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.

Covering Haswell Moor

Haswell Moor is about 2 miles west of Peterlee, in County Durham. From the centre of Haswell Moor to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Haswell Moor is one of 329 towns and villages in County Durham we cover. Our nearest city page is Newcastle upon Tyne, about 18 miles away.

Postcode districts we cover here: DH6. Jobs here include addresses on Poppy Lane, Salter's Lane and Bryony Walk. Other places close to Haswell Moor include Fleming Field (1 mile south), Haswell Plough (1 mile west), Haswell (1 mile north-west), Ludworth (2 miles west) and Wheatley Hill (2 miles south). Further out, we also cover Durham (7 miles west), Newton Aycliffe (12 miles south-west), Bishop Auckland (14 miles south-west), Spennymoor (9 miles south-west), Seaham (5 miles north-east) and Chester-le-Street (9 miles north-west).

Around Haswell Moor

Typical jobs here are in homes near St Saviour's Church, Easington Academy and Our Lady of Lourdes Roman Catholic Voluntary Aided Primary. Haswell Moor’s nearest station is Horden station, roughly 3.8 miles east. Other landmarks nearby include Dalton Park (3.4 miles north) and Easington (2.5 miles north-east). For a walk, there’s Beacon Hill.

Map of Haswell Moor © OpenStreetMap contributors

How we price bath repair

Repairs from £95. We give every job a fixed price from photos. These are the things that affect it:

  • Doing more than one item at once
  • Access to the area
  • How much damage there is
  • What kind of damage it is

The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.

Send photos for a quote

When you take your pictures, these tips help us give you a firm price:

  • A coin beside the damage so we can judge size
  • Any earlier repairs or coatings
  • Daylight if possible, and no flash reflection
  • Your postcode, so we can check dates

Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and you are under no obligation.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.