Shropshire · England
Bath Repair for Hayton's Bent homes
Fixed-price bath repair in Hayton's Bent and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- Rust spots around the plughole
- A cracked acrylic bath
Bath repair at your home in Hayton's Bent
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands with a one-year guarantee. Our technicians work on pressed steel enamel, roll-top & freestanding and whirlpool & spa baths, and people most frequently call us about an old repair that has yellowed or come loose and cracks in an acrylic bath.
Every repair comes with a one-year guarantee, wherever you are in Shropshire.
- Location
- Hayton's Bent (SY8)
- Region
- Shropshire
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Hayton's Bent
Hayton's Bent is about 15 miles south-west of Bridgnorth, in Shropshire. Jobs in Hayton's Bent are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. We work in 433 places in Shropshire. Our nearest city page is Birmingham, about 35 miles away.
Our visits in SY8 work the same way as everywhere else we cover. If you are just outside Hayton's Bent, we cover Stanton Lacy (2 miles south-west), Middleton (2 miles south-east), Bromfield (3 miles south-west), Henley (3 miles south-east) and Rockgreen (3 miles south). Larger places within reach include Bridgnorth (15 miles north-east), Ludlow (3 miles south), Church Stretton (9 miles north-west), Craven Arms (6 miles west), Much Wenlock (14 miles north-east) and Cleobury Mortimer (10 miles east).
Near you in Hayton's Bent
The closest station to Hayton's Bent is Ludlow station, roughly 3.2 miles south of the centre. Further afield, we also cover the area around Ludlow Community Hospital (3.1 miles south) and Corfham Castle (3 miles north). Green spaces nearby include Callow Hill.
Hayton's Bent questions
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
What do you need from me?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
What if the damage is worse than the photos show?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Can you repair a crack in an acrylic bath?
Often, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
What happens after I send pictures?
We come back with a fixed quote, plus dates. You’re under no obligation.
Different materials, different repairs
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
For landlords and businesses
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Repairing versus replacing in Hayton's Bent
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. Compared with replacing, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why us?
- Fixed prices from your pictures
- Usually one visit, start to finish
- One price list for the entire UK
- Colours mixed by hand to suit your surface
Take a look at our prices page or guide to resurfacing and replacement costs.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Stick to mild cleaners and a soft cloth
- Cover the bath during DIY or decorating
- Make sure an acrylic bath is firm underfoot
- Rinse the bath after use, especially in hard water areas
A repaired bath needs no special treatment, just sensible cleaning. Avoid bleach-based and gritty cleaners and rinse after use.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
How the visit works
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a morning or an afternoon, and we finish by cleaning up and talking you through the result.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Have a window or extractor fan available
- Let the surface dry out before the visit
- Let us know about parking or access
How to get a price
To get a price, send a couple of photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Advice
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
What we can’t put right
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
- Wear across the entire surface, which needs re-enamelling
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we repair
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
What we are called out for in Hayton's Bent
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
If you can see any of these, send us a picture:
- A cracked acrylic bath
- A failed DIY repair that is discoloured or lifting
- Rust spots around the plughole
- Scuffs and scratches in the surface
What your quote should include
- Who will actually do the work
- How long it needs to cure
- How to care for the finish
- How the colour is matched
Nearby places to Hayton's Bent
What else we do in Hayton's Bent
About our accreditations · Every repair comes with a one-year guarantee.
