Surrey · England

Bath chip & crack repair in Heath End, Surrey

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Heath End, with a one-year guarantee on every repair.

  • Repairs from £95
  • A hole punched through by something heavy
  • A cracked acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Heath End

Materials and what they mean for the repair

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.

Bath repair in Heath End, done in place

Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Whether it’s chips along the edge of the bath and rusty patches near the plughole, we can help, whatever the material.

You get a one-year guarantee, the same in Heath End as everywhere else we work.

Before and after: a damaged acrylic bath corner repaired in place
Where
Heath End (GU9)
Region
Surrey
Warranty
One year on every repair
Quote
From £95. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026

How to look after the repair

A little care keeps the finish looking good. Our advice:

  • Rinse the bath after use, especially in hard water areas
  • Keep metal cans and razors off the surface
  • Do not scrub with anything abrasive
  • Don’t leave a fresh chip for long

Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.

Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.

What we’re called out for in Heath End

Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.

Contact us if you’ve noticed:

  • Chips along the edge of the bath
  • Cracks in an acrylic bath
  • Rust spots around the plughole
  • A kit repair that didn’t last

Before you book anyone

  • How to look after the finish
  • Whether cleaning and preparation are in the price
  • Who turns up on the day
  • How long the guarantee is and what it covers

Choosing a repair company

Heath End: your questions answered

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

What about rust by the waste?

Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.

Will there be a smell?

Expect a mild smell while we’re working that clears as it cures.

Is there a guarantee?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Can you repair a failed DIY repair?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

Can tenants book a repair?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Can you repair a chip on a coloured bath?

Yes, coloured baths are no problem. We tint the finish to your bath on site.

What happens next?

You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.

Why repair rather than replace?

When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

Why book with us

  • We leave the room as we found it
  • Repair technicians who travel to you, UK-wide
  • Honest advice, even when it means no job
  • One-year guarantee on every repair

Take a look at our prices page or resurfacing vs replacement cost guide.

Where we work around Heath End

Heath End is about 1 mile south-west of Aldershot, in Surrey. Wherever you are in the GU9 postcode area, a technician comes to you. We work in all 395 towns and villages in Surrey. Our jobs stretch from Heath End to London (about 35 miles away).

Postcode districts we cover here: GU9. Local streets include Farnborough Road, Alma Way and The Fairway, all of which we cover. If you’re just outside Heath End, we cover Upper Hale (1 mile west), Hale (1 mile south), Weybourne (1 mile east), Badshot Lea (1 mile south-east) and Aldershot (1 mile north-east). We also work in nearby towns such as Guildford (9 miles east), Woking (11 miles north-east), Camberley (7 miles north), Frimley (6 miles north-east), Haslemere (11 miles south) and Cranleigh (15 miles south-east).

Near you in Heath End

Locally, our jobs take us to homes close to Prince Consort's Library, Farnham Heath End School and Weybourne LNR. Other local landmarks include William Cobbett Primary School (0.5 miles south-east), St Mark the Evangelist Church (0.6 miles west) and The Six Bells pub (0.9 miles south). The nearest railway station is Aldershot station, roughly 1.4 miles north-east. Well-known places in the area include Museum of Farnham (1.8 miles south-west) and Seale and Tongham (2.9 miles south-east). For a walk, there’s Aunt's Pool and Rowhill Nature Reserve.

Map of Heath End © OpenStreetMap contributors

When a repair isn’t the answer

A repair isn’t right for every job, for example:

  • Leaking fittings, which need a plumber
  • Metal that has corroded all the way through
  • A whole bath that is dull or worn, where a full re-enamel is the better fix

If in doubt, send pictures and we will say what we think before you book.

What we work on

  • Cast iron enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic

Landlord and trade work in Heath End

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.

What we do, step by step

Arrival times are agreed in advance, so you are not left guessing. Once we are there, the work takes two to three hours for most chips for most jobs. We leave the room clean.

  1. First, we check the damage against your photos and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Before we arrive

  • Move bottles, mats and clutter away from the area
  • Have somewhere for us to park nearby if possible
  • Tell us about any previous repairs or coatings

Getting a price

Most customers in Heath End get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Get a free quote

Read more

DIY repairs versus a professional job

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.